User's Manual

ManualsBrandsDynaPoint ManualsElectronicsBLUETOOTH

User Manual

GOGOPAD User manual

1. Feature：

Electronic

Touch Pad DPI 200

Button

Mouse RB ;Mouse LB ;Mouse Scroll

up/down ;Media ;Play ;prev. ;next ;volum

up/down

Radio Class Bluetooth Class II

Frequence 2402 - 2480 MHz

Bluetooth Spec Bluetooth specification V2.0

Channal Frequency Hopping.

Distance 7 M

RF Output Power 0 dBm

PWR consumption 7ma

Charging time 4hr

Bat. life 2 month

Mechanical

Communication ：Go PAD to Host

key

LED

Summary of content (7 pages)

PAGE 1
User Manual GOGOPAD User manual 1. Feature： Electronic Touch Pad DPI Button Radio Class Frequence Bluetooth Spec Channal Distance RF Output Power PWR consumption Charging time Bat. life 200 Mouse RB ;Mouse LB ;Mouse Scroll up/down ;Media ;Play ;prev. ;next ;volum up/down Bluetooth Class II 2402 - 2480 MHz Bluetooth specification V2.0 Frequency Hopping.
PAGE 2
.1 Connect the Blooth dongle to USB port on PC. If your PC builds Bluetooth while having, please turn on Bluetooth. 2.2 Bluetooth logo of lower right corner of the computer that please double click 2.3 Click “ADD” Button 2.4 Select □My device is set up and ready to be found 。then click Next 2.5 The computer will jump out the window below at this moment. Then push GO PAD ID key, and the LED will be blinking.
PAGE 3
2.6 PC will find “Bluetooth GoGoPad”. Click “Bluetooth GoGopad” then click the next step 2.
PAGE 4
2.8 PC is installing the driver of the Bluetooth GoGoPad 2.9 Click finish. GoGoPad led will be off，Bluetooth GoGoPad can work at this moment.
PAGE 5
3. Operation： 3.1 As you move the finger on PAD, the cursor will be followed to move. At doubling click PAD, equal as you left key of mouse double click 3.
PAGE 6
Prev. Prev of media play Next Next of media pla VolVol+ Volume down of media play Volume up of media play Play/Pause Play/pluse of media play 4. Charging function： GoGoPad offer two way charge, can choose PCMCIA slot or USB port to be charged 4.1 Insert BT in the PCMCIA slot of the compute. GoPad LED will be on while charging, charge finishing LED will off 4.2 Join usb cable from PC to GoPAD.
PAGE 7
FCC WARNING This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.