User's Manual

DS552LT5-2 User Manual 10

Installation

The LCD must be properly installed using a wall mount. Incorrect installation may cause injury or

damage the equipment. Product warranty does not cover the damage caused by improper

installation and DynaScan shall not be held responsible in such incident. Refer to the mount

manufacturer’s instructions for proper installation.

Mounting

 We recommend for at least four people to handle and mount the display.

 Mounting the Professional LCD on the wall is the responsibility of the user. Not all walls provide

enough strength to support the LCD. The LCD may drop and cause serious injury if it is

mounted on a slanted wall. Product warranty does not cover improper installation, modification,

or damage caused by natural disasters. DynaScan recommends having certified professionals

to evaluate the installation site and perform the mounting operation.

 Do not to cover the vent and/or the heat sink in order to ensure proper heat dissipation.

 Refer to the installation guide provided by the manufacturer for proper mounting.

When mounting on a wall

 A wall mount is not included in the accessory. Please purchase a VESA Standard wall mount to

secure the LCD. DynaScan is not responsible for the damage caused by using non-standard

wall mounts.

 Verify that the mounting location can support the weight of the LCD before installation.

 The installation angle must be within 15 degrees of the vertical axis.

 Do not install the wall mount while the power is turned on as it may cause serious injury due to

electrical shock.

Model Number

VESA (mm)

Screw

Specification

Screw Length

Number

DS552LT5-2

(A * B)

400 * 400

Greater than 10mm

Smaller than 12mm

(not including wall

mount thickness)