User's Manual

FBP205 User Manual
4. Hardware Connection
Connector
Description
USB2.0
5V
5V Supply Voltage
DM
USB Data 一
DP
USB Data 十
GND
Ground
Antenna 1
Single-band 5G or dual-band antennas can be used, single-band
2.4G antennas cannot be used
Antenna 2
5. Module Specification
(1) General Description
This document is to specify the product requirements for 802.11a/b/g/n/ac USB Module. This Card is
based on REALTEK RTL8812CU chipset .It is a complete dual-band(2.4GHz and 5GHz)WIFI 2×2 MIMO
MAC/PHY/Radio System-on-a-Chip. This module provides a high level of integration with a dual-stream
IEEE 802.11ac MAC/ base band/radio. The WLAN operation supports 20MHz,40MHz and 80MHz channels
for data rates up to 866.7Mbps. It is also backward complied with IEEE 802.11a standard from
5.15~5.825GHz wideband and IEEE 802.11b/g standard from 2.4~2.5GHz. It can be used to provide up to
54Mbps for IEEE 802.11a and IEEE 802.11g, 11Mbps for IEEE 802.11b and 300Mbps for IEEE 802.11n.