User's Manual

23
5. Advance
ITEM 1
ITEM 2
DEFAULT
DESCRIPTION
Advance
Display Mode
Portrait
Change the Menu orientation. The Menu
can be displayed in either LANDSCAPE,
PORTRAIT or PORTRAIT FLIP mode.
Screen
Protection
Off
Turn on / off image burn-in protection.
Set image burn-in protection interval.
Range 0 – 100 minutes.
IR Control
On
Enable/disable the remote control for
Menu.
Note: When disabled, the remote control
function can be enabled again from
the control panel on the display or
through the DynaScan “Display
Manager” application.
Power Off Mode
Standby
When in Power Off Mode, RS-232 controls
do not function. Only [Main Power
Switch] on the display or [Power Button] on
the remote control can wake up the
display.
AC Back Status
Power On
Choose to use the AC back status
function.
Power On: Display booting up when the
power back after an outage.
Standby: Display keeps soft-off status
when the power back after an
outage.
Memory: Display will back to the last state
when the power back after an
outage.
Volume
50
Set volume.
Range 100 – 0.
Reset Default
Setting
Off
Restore all settings to default.
Note: It does not modify CURRENT DATE,
CURRENT TIME, DATE OF WEEK,
TIME ZONE, POWER ON TIME and
POWER OFF TIME.