User's Manual

Navigating the On Screen Display (OSD) Menu

Press the MENU button on the built-in keypad or remote control to show the OSD. Use the

navigation arrows to select and adjust the menu items.

*The change of each setting can only enable when you press “LEFT” (refer to p.15) to back to the last

menu layer.

1. Input Source

ITEM 1

ITEM 2

DEFAULT

DESCRIPTION

Input Source

Main

HDMI 1

Set the Main input to display.

Failover 1

HDMI 2

Set the Failover 1 input to display.

Failover 2

Set the Failover 2 input to display.

Failover 3

DSM365

Set the Failover 3 input to display.

Failover 4

SDM

Set the Failover 4 input to display.

2. Picture

ITEM 1

ITEM 2

DEFAULT

DESCRIPTION

Picture

Color

Temperature

USER 2

Select the color temperature. (User2,

User1, D93, D65 and D55).

Red

Adjust the red light level. Range 0 – 100.

Note: The feature is only supported on

User2 mode.

Green

Adjust the green light level. Range 0 –

100.