User Manual For Android Control Board With Wireless module Product .：Digital Transmission System Model No.
This user manual pertains to Android player main board with wireless module, the main board can be assembled in the Android based Advertising Media player, listed as below Model Model Description 66502 65”Monitor 66901 86”Monitor Specifications Item Description Storage Internal：16GB NAND Flash, External：Micro SD Card WIFI 802.
Hardware interface
WIFI pin location and description： PIN SYMBOL DESCRIPTION 1 2 3 4 5 6 7 8 9 NC Not Connect NC Not Connect NC Not Connect NC Not Connect GND GND WL_USB_DP USB D+ WL_USB_DN USB D- GND GND NC 10 11 PIN SYMBOL BT_SYNC_IN Not Connect 17 18 19 20 21 22 23 24 25 NC Not Connect 26 WLAN_WAKE_HOST GND GND 27 NC GND DESCRIPTION GND NC GND GND GND GND NC GND GND GND GND GND GND WLAN CHIP WAKES UP HOST Shutdown CHIP 12 NC Not Connect 28 CHIP_EN （Internal 47KΩ pull up to
FCC Statement： FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
This module is intended under the following conditions： 1. This module is certified pursuant to Part 15 rules section(15.247). 2. This module is limited to host model number: 66502, 66901 / Brand: DynaScan 3. This module has been approved to operate with the antenna types listed below, with the maximum permissible gain indicated. Frequency Band Antenna Type Gain(dBi) 2400-2483.5MHz PIFA 0.
For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible. Name: DynaScan Technology, Inc. Address: 7 Chrysler, Irvine, CA 92618, USA Office: +1 949.421.0348 https://www.dynascandisplay.
