User's Manual

DI100ST2-M User Manual 10
Maintenance
 Inspect the fasteners regularly for signs of loosening or deformation. Please perform
appropriate corrective measures when a problem is identified. Neglecting the problem may
worsen the situation.
 Increase the inspection frequency on areas where previous maintenance had occurred to ensure
the problems do not occur again.
Wall Mounting
 A wall mount is not included. Please purchase a VESA Standard wall mount to secure the LCD.
DynaScan is not responsible for damages caused by using non-standard wall mounts.
 Verify that the mounting location can support the weight of the LCD before installation.
 The installation angle must be within 15 degrees of the vertical axis.
 Do not install the wall mount while the power is turned on as it may cause serious injury from
electrical shock.
15∘