User's Manual

DI100ST2-M User Manual 11
Connecting to a Power Source
Using the power cable provided, plug it in the power inlet on the side of the display shown in the
diagram below. Connect the power cable to a 100-240 volt, 50 / 60Hz AC power outlet.
Insert the plug completely into the socket. A loose power connection may cause damage to the
display and/or lead to a fire hazard.
Connecting an External Video Source
Turn OFF the power of both LCD and external video device. Using the DP cable (or HDMI cable),
insert one end into the DP-IN (or HDMI 1-IN, HDMI 2-IN) which shown in the diagram below.
Connect the other end of the DP cable (HDMI cable) to the DP output (or HDMI output) of the video
source. Refer to your video device’s manual for additional information.