User's Manual

DI100ST2-M User Manual 12

Input / Output Terminals

A. AC (IN): Connect the supplied power cord to the wall outlet.

B. Power Switch: Press to switch the main power on/off.

C. RJ-45 1 (IN): RJ45 network input connection.

D. RJ-45 2 (IN): RJ45 network input connection.

E. RS-232 (IN): RS232C network input connection for remote control from PC.

F. HDMI 1 (IN): Connect the HDMI output of a PC or an AV device via a HDMI cable.

G. HDMI 2 (IN): Connect the HDMI output of a PC or an AV device via a HDMI cable.

H. DP (IN): Connect the DP output of a PC or an AV device via a DP cable.

I. USB 3.0 port: Support for USB flash drive storage, mouse and keyboard.

J. Extension Connector: Extension Connector for optional IR Extension sensor kit (ESK302).

K. Micro SD card: Support for up to 128GB, FAT32 format is supported.

L. Thermal: Extension Connector for optional Extension thermal kit (ETK203).

M. Audio (OUT): Connect the audio signal output from Audio IN jack to an external AV device.

N. SDM Slot: Install SDM, please refer to P.27