User's Manual

DI100ST2-M User Manual 20
5. Advance
ITEM 1
ITEM 2
DEFAULT
DESCRIPTION
Advance
Display Mode
Auto
Change the Menu orientation. The Menu
can be displayed in either LANDSCAPE or
PORTRAIT mode.
Screen
Protection
Off
Turn on / off image burn-in protection.
Set image burn-in protection interval.
Range 0 – 100 minutes.
IR Control
On
Enable/disable the remote control for Menu.
Note: When disabled, the remote control
function can be enabled again from
the control panel on the display or
through the DynaScan “Display
Manager” application.
Power Off Mode
Stand By
When in Power Off Mode, RS-232 controls
do not function. Only [Main Power Switch]
on the display or [Power Button] on the
remote control can wake up the display.
AC Back Status
Power On
Choose to use the AC back status function.
Power On: Display booting up when the
power back after an outage.
Standby: Display keeps soft-off status when
the power back after an outage.
Memory: Display will back to the last state
when the power back after an
outage.
Volume
50
Set volume.
Range 100 – 0.
Reset Default
Setting
Off
Restore all settings to default.
Note: It does not modify CURRENT DATE,
CURRENT TIME, DATE OF WEEK,
TIME ZONE, POWER ON TIME and
POWER OFF TIME.