User's Manual

DI100ST2-M User Manual 5
Important Safety Information
 Disassembling the LCD is strictly prohibited. Opening the cover may expose the user to electric
shock or other hazards. Please contact DynaScan certified service professionals for all
maintenance requirements.
 Do not allow any liquid to enter the LCD. Also avoid placing the LCD close to water sources.
 Do not place heavy objects on the power cord. A damaged power cord might cause electric
shock or fire.
 Do not bend, twist, or damage the power cord.
 The power cord must comply with the local safety regulations.
 Do not damage or modify the prongs/pins and the ground contact on the power cord plug.
 Do not place the LCD on an unleveled surface or an unstable vehicle. The LCD could fall over
and cause substantial damage.
 Do not cover the vents and/or the heat sink.
 Do not install the LCD beside radiators or other heat sources. The installation site should have
sufficient ventilation so the heat generated by the LCD can be dissipated.
 Do not use the Signage in a hot, humid, dusty, or fumy environment.
 Handle the LCD with care. Save the packaging materials for transport later.
 Clean the LCD backside at least once a month for dust and other particles.
Unplug the LCD immediately and contact a DynaScan certified service professional as soon as
possible when any of the following situations occurs:
 Damaged power cord or power plug.
 If liquid or foreign object has entered the LCD.
 If the LCD has been exposed to rain or water.
 If the LCD has been dropped or the casing has become damaged.
 If any structural damage such as cracks or unnatural vibration is found.
 If the LCD cannot be operated following the steps outlined in this manual.
 If the LCD emits smoke or other odors, or generates strange noises.
Operating Suggestions
 Avoid displaying a stationary image for a long period of time in order to prevent image sticking.
Cleaning the Panel
 Use a soft, lint-free cloth to gently wipe the dust off from the screen panel.
 Do not use any hard material to wipe the panel.
 Do not poke the panel with your hand or any sharp object (such as a pen or a nail) or exert
excessive pressure on the panel to prevent any damage.
 Do not use any cleaning solutions on the panel as it might cause discoloration.
Cleaning the Casing
 Unplug the power cord.
 Gently wipe the casing with a soft cloth.
Attention
 Do not use any of the following solutions to clean the casing as they may damage the paint and
cause it to crack or peel: benzene solution, alkaline solution, alcohol-based cleaning solution,
glass cleaner, wax, polisher, or detergent.