Specifications

English - 10 -
7.4.- INSTALL AND REMOVE THE BELT CLIP:
Place the belt clip for slipping it for the grooves of the battery rear side until the end.
To remove the belt clip, liberate the retention lash of the belt clip and slip it until he separates to the
battery.
Note:
- Do not use any glue to fix the belt clip, it will damage the belt clip and the battery case.
7.5.- INSTALL THE EXTERNAL MICROHEADSET (OPTIONAL):
Remove the rubber cover and install the optional microheadset connecting it to the transceiver
“MIC-SP” jack.
7.6.- BATTERY CHARGING:
The battery pack is not fully charger when manufacturer, and charge it before first use.
The battery can not reach the normal capacity for the first time charging after purchasing or storing
it more than two months. However, it will return the normal capacity after charging and discharging
repeatedly 3-5 times.
To battery charging process:
1.- Insert the AC/DC adapter jack to the connector of top battery charger.
2.- Connect the AC/DC adaptor to the 230 VAC wall outlet.
3.- Put the Li-Ion battery or the turn off transceiver with the battery, on the desk top.
Notes:
- Make sure the battery connect with the touching piece of the charging terminal.
- The led indicator red illuminates, indicates that the Li-Ion battery is in charging procedure.
- The led indicator green illuminates, indicates that the Li-Ion battery is fully charging. Charge the battery in
power off mode transceiver.
- Do not short circuit the Li-Ion battery terminals.
- Do not dispose the Li-Iom battery in fire.
- Do not disassemble the case of the Li-Ion battery.
8.- OPERATION:
8.1.-TURN ON/OFF THE TRANSCEIVER:
Rotate the [ON/OFF/Volume] knob clockwise until a beep sound is heard. All icons appeared on
the screen.
To turn off the transceiver, rotate the [ON/OFF/Volume] knob counter-clockwise. All the icons on
the display will disappear and the transceiver is off.
8.2.- VOLUME AJUST:
Rotate the [ON/OFF/Volume] knob clockwise to increase the volume and counter-clockwise to
decrease.
8.3.- TRANSMITTING/RECEIVING:
Firstly, hold down briefly the [Squelch] key to make sure that the channel or frequency is not busy
and then press and hold the [PTT] key. Speak 4/10cm far from the unit..
The status led indicator will be illuminated in red color.
Release the [PTT] key to receive.
Παύλος Μεϊµάρης Ελπίδος 34 (ΒΑΟ) Συκιές, Θεσσαλονίκη τηλ 2310.634.513, 6977.38.38.73
URL:
http://www.meimaris.com -
Εmail: [e-mail]
Παύλος Μεϊµάρης Ελπίδος 34 (ΒΑΟ) Συκιές, Θεσσαλονίκη τηλ 2310.634.513, 6977.38.38.73
URL:
http://www.meimaris.com -
Εmail: [e-mail]