Specifications

English - 12 -
- SE: The transceiver stops on a busy channel or frequency and exits the scan mode.
8.9.- OPERATION MODE SELECTION:
This transceiver has three modes to choose from: Double-standby, channel mode and frequency
mode.
1.- Double-standby mode:
Long press the [A/B] key to enter or exit the double-standby mode. In double-standby mode, there
will be two channel A or B instructions. When “A” is displayed, the channel can receive and
transmit, while the other channel can only receive. When “B” is displayed, the channel can receive
and transmit, another channel can only receive. Short press the [A/B] key to switch “A” or “B”.
2.- Channel mode:
Press the [VFO/MR] key to switch channel mode or frequency mode .
1) Display the name of the current channel and channel number.
CH 1: Indicates that the current name of the channel, the user can edit it.
CH-001: Current channel number.
2) Display the channel number and frequency:
CH 1: Indicates the current channel, the user can edit the name.
430.700: Indicates the frequency of the current channel.
3) The receiver frequency and transmit frequency on the current channel:
R430.700: Indicates receiving frequency on the current channel.
T430.700: Indicates transmitting frequency on the current channel.
3.- Frequency mode:
R433.700: Indicates the receiving frequency.
T433.700: Indicated the transmitting frequency.
The difference between channel mode and frequency mode is whether the left side LCD displays
.
8.10.- FM RADIO:
Press the [MENU] + side key 2 to enter into the FM radio state, press the number keys or turn the
selector knob to select the radio frequency. Press the [*LOCK] key or the [#T-R] key to search the
broadcast station. Press the [MENU] + side key 2 to exit the FM radio mode.
8.11.- SIDE KEYS DEFINITION:
You distributor or salesperson will program in the side key 2 as follows: 1) Optional signaling call;
2) Emergency alarm; 3) 1750 Hz tone signaling; 4) Instantaneous squelch.
8.12.- “DTMF” ENCODE AND DECODE:
This transceiver can transmit and receive “DTMF” tones. In channel mode, press the [PTT] key and
enter the number on the keyboard, the corresponding “DTMF” code would be send out. “DTMF”
code corresponding function keys issued as follows: