Specifications

English - 14 -
[0ANI] key to turned on or off the “ANI” function.
8.16.- STORE:
To store a frquency and its settings (CTCSS, DCS, SHIFT REPEATERS, etc.) follow the procedure
below:
1.- At first, choose all the settings to store.
2.- Press the [MENU] key.
3.- Then, press the [VFO/MR] key.
4.- Rotate the selector knob and select the memory number where you want to store the frequency
and its settings.
5.- Confirm your selection by pressing the [VFO/MR] key.
Note:
- A triangle displayed underneath the channel number indicates that it has already been stored.
8.17.- EMERGENCY CALL CHANNEL STORAGE:
Select the necessary frequency for emergency call, press the [MENU] + [VFO/MR] + [#T-R] key,
the screen displays the word “CAL”. “CAL” character flashes if the emergency call channel have
been stored, you can press the [VFO/MR] key to overwrite the channel.
8.18.- DELETE A CHANNEL:
1.- Delete one store channel:
In channel mode, turn off the transceiver.
Press and hold the [VFO/MR] key, turn on the unit. “001DEL?” and stored channel
number will be displayed. Turn the selector knob or select by keypad the channel to
delete. Push the [ENTER] key, “YES?” appears on the display. Press the [ENTER]
key again to confirm.
2.- Reset (Delete all the settings in frequency mode):
Press and hold the [MENU] key and turn on the transceiver, “RESET?” is
displayed. Press the [ENTER] key, “VFO?” is shown on the display. Press the
[ENTER] key again for confirmation.
3.- Delete all settings (Delete the settings in both frequency and channel mode):
Press and hold the [MENU] key and turn on the transceiver, “RESET?” is
displayed. Press the [ENTER] key, “VFO?” is show on thw display. Turn the
selector knob to select “FULL?”, then press the [ENTER] key to delete all the
settings in frequency and channel mode.
9.- SHORTCUTS OPERATION:
[MENU] + [0ANI] + [ENTER]: The “ANI” code selection.
[MENU] + [1SCAN] + [ENTER]: Scan mode.
[MENU] + [2PRI] + [ENTER]: Priority channel scan mode.
[MENU] + [3VOX] + [ENTER]: “VOX” sensitivity setting.
[MENU] + [4POW] + [ENTER]: Transmitting power setting.
[MENU] + [5SQL] + [ENTER]: Squelch setting.
[MENU] + [6SCR] + [ENTER]: Scrambler on/off setting.
[MENU] + [7LED] + [ENTER]: Backlight color setting.
[MENU] + [8BEEP] + [ENTER]: Beep tone setting.
Παύλος Μεϊµάρης Ελπίδος 34 (ΒΑΟ) Συκιές, Θεσσαλονίκη τηλ 2310.634.513, 6977.38.38.73
URL:
http://www.meimaris.com -
Εmail: [e-mail]
Παύλος Μεϊµάρης Ελπίδος 34 (ΒΑΟ) Συκιές, Θεσσαλονίκη τηλ 2310.634.513, 6977.38.38.73
URL:
http://www.meimaris.com -
Εmail: [e-mail]