Specifications
English - 17 - 
6.- Press the [VFO/MR] key to exit. 
To activate and select rapidly the squelch level, you can also use the fast menu. Press the [MENU] 
key, then press the [5SQL] key and follow the procedure above described. 
11.6.- “SCRAMBLER” FUNCTION: 
To turn on/off the scrambler function, follow this procedure: 
1.- Press the [MENU] key. 
2.- Turn the selector knob until “SCRM” (menu 006) is displayed. 
3.- Press the [ENTER] key. 
4.- Turn the selector knob to select 1-8 group scrambler or set it “OFF”. 
5.- Press the [ENTER] key. 
6.- Press the [VFO/MR] key to exit. 
To select “Scrambler” function rapidly, you can also use the fast menu. Press the [MENU] key, then 
press the [6SCR] key and follow the procedure above described. 
Note: 
- The “Scrambler” function will be automatically “OFF” if menu 31 “DUPLEX” was set “ON”. 
11.7.- BACKLIGHT COLOR SELECTION: 
To select the LCD backlight color, follow this procedure: 
1.- Press the [MENU] key. 
2.- Turn the selector knob until “LIGHT” (menu 007) is displayed. 
3.- Press the [ENTER] key. 
4.- Turn the selector knob to select 3 different color: Blue, orange and purple. 
5.- Press the [ENTER] key. 
6.- Press the [VFO/MR] key to exit. 
To select rapidly the backlight color, you can also use the fast menu. Press the [MENU] key, then 
press the [7LED] key and follow the procedure above described. 
11.8.- “BEEP” ON/OFF: 
The keypad “beep” is activated by default. To deactivate it: 
1.- Press the [MENU] key. 
2.- Turn the selector knob until “BEEP” (menu 008) is displayed. 
3.- Press the [ENTER] key. 
4.- Turn the selector knob to activate/deactivate the “beep” (ON = “beep” enabled; 
OFF = “beep” disabled). 
5.- Press the [ENTER] key. 
6.- Press the [VFO/MR] key to exit. 
To activate/deactivate rapidly the keypad “beep”, you can use the fast menu. Press 
the  [MENU]  key,  then  press  the  [8BEEP]  key  and  follow  the  procedure  above 
described. 
11.9.- VOICE PROMPT: 
With this function, you activate a voice that informs about any operation/selection 
you are doing in your transceiver. To activate this function, follow these steps:. 
1.- Press the [MENU] key. 
2.- Rotate the selector knob until “VOICE” (menu 009) is displayed. 
3.- Press the [ENTER] key. 
4.- Turn the selector knob to disable or select the desired language. 
Παύλος Μεϊµάρης Ελπίδος 34 (ΒΑΟ) Συκιές, Θεσσαλονίκη τηλ 2310.634.513, 6977.38.38.73 
URL: 
http://www.meimaris.com -
Εmail: info@meimaris.com
Παύλος Μεϊµάρης Ελπίδος 34 (ΒΑΟ) Συκιές, Θεσσαλονίκη τηλ 2310.634.513, 6977.38.38.73 
URL: 
http://www.meimaris.com -
Εmail: info@meimaris.com










