user manual

Model CH45
EIA 422 or 485
2-2
manufacturer's specification on attenuation per unit length, attenuation due to aging,
diameter, and tensile strength. Choosing the best quality FOC for your installation is
important.
NOTE
DYMEC-DynaStar can supply multi-mode glass FOC in either Simplex, Duplex, or Breakout
construction, cut to length, terminated, polished and tested. The specifications for all
DYMEC-DynaStar supplied cables are as follows:
Fiber Diameter: 62.5/125µm
Tensile Strength: 100 kpsi
Loss: 3 dB per kilometer
Aging Loss: less than 3 dB
The Model CH45 Link/Repeater’s optical ports are designed for ST type terminations and are
compatible with multi-mode FOC ranging from 50 µm to 200 µm.