User Manual

AMPWare Version AFW0.002

SW Version AFG0.030+0000

HW Version 3.4

Start time Time in class

Date Time of Day Inactive Active Locomotion Total Cal Total Steps

Locomotion Steps Total Distance Locomotion Distance Locomotion Ave

Speed Notes

Activity Classes

Every second of the monitoring session is classified into one of three activity classes:

Inactive, Active, and Locomotion.

Inactive Class

Time spent sitting, lying, or standing still is accumulated into the Inactive Class. To be

classified as Inactive the wearer must not take any steps for at least 20 seconds.

Active Class

Time spent "up and about" is accumulated into the Active Class. Typical indoor movement

activities in the Active class are preparing a meal, cleaning the house, or short trips around

the office.

Locomotion Class

Time spent "walking somewhere" is accumulated into the Locomotion Class. The wearer

must take at least 20 consecutive steps for the activity to register in the Locomotion Class.

Examples include going for a walk, walking in a shopping mall, or walking across a parking

lot. Speed is calculated for locomotion within this class.

FAQS

How do I know if the pod is collecting data?

· The flashing clock icon at the bottom of the screen on the pod flashes during data

collection. If this icon is flashing, then you know data are being collected. If this icon is not

visible then the pod is not collecting data.

· The pod shows the elapsed time since the start of the trial. Initially elapsed time is

displayed in minutes and seconds (mm:ss), then hours and minutes (hh:mm), then days

and hours (e.g. 3d04 for three days and four hours).

How do I stop data collection?

· Use STOP under the TRIAL menu.

If I accidentally press a button during data collection, will it affect the data or stop the trial?

· No, button presses will navigate through menus/data; only STOP under the TRIAL

menu will stop the trial.

Can the pod be worn in the shower, in the rain, or in the bath?