User Manual

AMP 331 Instructions for Users
Dynastream Innovations Inc.
DOCUMENT NO: D00000381 Rev. 0.E SHEET: 10 of 10
5 AMP LINK
The AMP Link is used for communication between the pod and a computer. The link should be plugged into
the USB port of the PC. You will need to install drivers the first time you use an AMP Link. Follow these
instructions the first time you use a new link:
1. Plug the AMP Link into the USB port of your computer. Position the link at least two feet from the
computer monitor.
2. The PC will detect the Link and will automatically open a window with the heading “Found New
Hardware”, click “Next”.
3. Insert the AMP 331 CD into your CD drive.
4. From the list of options, select the checkbox to “Search for a suitable driver for my device
(recommended)”, click “Next”.
5. When prompted to “Select a location”, select the checkbox for “CD-ROM drives”.
6. Wait as the drivers are installed. When Windows has finished installing the drivers, click “Finish”.