User's Manual

3.4.4. HR limits

With this function you can set limits for your desirable heart rate for your training and

receive an alarm to notify when your heart rate is above or below the set limits. You

can toggle between HR limits on and off, by long pressing ENTER in the main modes.

If HR limits are active, number is displayed on the right hand side of the Training

mode display. Refer to section 4 for more information on alarms and limits.

• Low limit signal: - - - - - -

• High limit signal: -------------

To set the limits:

1. In the Training menu scroll to Hr Limits and press

ENTER.

2. Press UP/DOWN to select On and press ENTER.

3. Set the desired high limit with UP/DOWN and press

ENTER.

4. Set the desired low limit with UP/DOWN and press

ENTER.

NOTE: The maximum heart rate limit is 240 and the mini-

mum heart rate limit is 30. The maximum limit cannot be

lower than the minimum and vice versa. If the maximum

rate is scrolled above 240, it continues from the minimum

rate upwards.

NOTE: In the log, the training session is divided into dif-

ferent zones according to your HR limits.