User Manual

Forerunner 50 Owner’s Manual 9
GettinG Started
3. Press start to begin recording.
4. Run or walk the known
distance.
5. Press
stop.
6. Use
+ and - to adjust the
distance to the ACTUAL
distance.
7. Press
view to save the
calibrated distance.
Manual Calibration
If your foot pod distance seems
slightly high or low each time you
run, you can manually adjust the
calibration factor.
1. On the Train page, press and
hold start/stop.
2. Press
view to advance to the
CALIB setting.
3. Use
+ and - to adjust the
calibration factor.
4. Press
view to save the
calibration factor.
Removing the Foot Pod
Press the tabs on the front of the lace
clip to remove the foot pod.
Turning Off the Foot Pod
After 30 minutes of inactivity, the
foot pod automatically powers off
to conserve the battery (LED blinks
twice).
Using the GSC10
™
Your Forerunner is compatible
with the GSC10 speed and cadence
sensor for bikes. The GSC10 is an
optional accessory that is available
at http://shop.garmin.com. For more
information, see page 25.
190-00839-00_0D.indd 9 7/31/2007 1:48:32 PM