Installation Guide

4
unit: mm
LOCATING YOUR ELECTRIC FIREPLACE
Your new electric fireplace may be installed virtually anywhere in your home. However, when choosing a
location ensure that the general instructions are followed. For best results, install out of direct sunlight.
Power supply service must be either completed or placed within the electric fireplace prior to finishing to
avoid reconstruction.
WARNING ! Keep drapery and other furnishings at least 3ft /0.9m from the front of the
electric fireplace.
FRAMING
·Choose a fireplace location and frame as shown in figure 2.
·Frame in the fireplace with a header across the top.
·It is important to allow for finished face when setting the depth of the frame.
·If a hearth system or raised hearth is to be installed, the unit MUST be raised to provide service access
and use of front.
·The fireplace can now be positioned in the opening.
·Level it with shims if necessary, and attach the unit to the frame using the fit brackets provided.
·Combustible or non-combustible materials may be used to finish up to the fireplace opening.
Note:
Ensure that you leave adequate room to remove and replace the front screen or optional
front.
figure 2
MODEL W1 W2 W3
DY-BT35 855 895 924
DY-BT44 1055 1095 1124
DY-BT55 1355 1395 1424
DY-BT63 1555 1595 1624
DY-BT79 1955 1995 2024
MODEL W D H
DY-BT35 928 180 495
DY-BT44 1128 180 495
DY-BT55 1428 180 495
DY-BT63
1628
180
495
DY-BT79 2028 180 495
unit: mm