DYNASTY FIREPLACES Cascade Series Linear smart electric fireplace • Cheminée électrique linéaire intelligente Installation Instructions & Operating Manual Manuel d’Installation & d’Utilisation Models / Modèles DY-BTX42 | DY-BTX52 | DY-BTX64 | DY-BTX74 | DY-BTX82 | DY-BTX100 READ CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE, INSTALL, OPERATE, OR MAINTAIN THIS PRODUCT. PROTECT YOURSELF AND OTHERS BY OBSERVING ALL SAFETY INFORMATION.
SAFETY INFORMATION • • • • • • • • • • • • • • • • Read all instructions before using this heater! This heater is hot when in use. To avoid burns, DO NOT let bare skin touch hot surfaces. If provided, use handles when moving this heater. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9m) from the front of the heater and keep them away from the sides and rear.
SAFETY INFORMATION • • • • • • • • • • • • WARNING: REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK---DO NOT USE THIS HEATER WITH ANY SOLID-STATE SPEED CONTROL DEVICES. This product is not intended to be a primary heat source. It is for supplemental heat only. INDOOR use only! NEVER use this heater outdoors! Doing so may result in electric shock! Risk of electric shock! DO NOT OPEN! No user-serviceable parts inside! NEVER modify this heater. Doing so could result in personal injury or property damage.
GENERAL SPECIFICATIONS ELECTRICAL SPECIFICATIONS (all models) INPUT VOLTAGE 120V AC, 60 Hz CABLE LENGTH 72", 2.0m MAX. POWER CONSUMPTION 1500W 1500W Nominal HEAT OUTPUT 1500W Max. 750W Min. FLAME ONLY OPERATION DY-BTX42 25 W DY-BTX52 32 W DY-BTX64 34 W DY-BTX74 41 W DY-BTX82 46 W DY-BTX100 51 W WiFi OPERATION • Connect on 2.4 GHz network only WiFi 802.
PACKAGE CONTENTS PLEASE REMOVE ACCESSORIES AND MANUAL BEFORE DISCARDING PACKAGING For warranty, parts, or product support, please visit our site at: support.dynastyfireplaces.com Contact us at: support@dynastyfireplaces.com INSTALLATION LOCATING YOUR ELECTRIC FIREPLACE Your new electric fireplace may be installed virtually anywhere in your home. However, when choosing a location, ensure that the general instructions are followed. For best results, install out of direct sunlight.
WARNING! Keep drapery and other furnishings at least 3ft /0.9m from the front of the electric fireplace. FRAMING & INSTALLATION Note: Ensure that you leave adequate room to remove and replace the front screen or optional front. Framing Dimensions Model DY-BTX 42 DY-BTX 52 DY-BTX 64 DY-BTX 74 DY-BTX 82 DY-BTX 100 A B Depth 495 mm 19 ½ in. 495 mm 19 ½ in. 495 mm 19 ½ in. 495 mm 19 ½ in. 495 mm 19 ½ in. 495 mm 19 ½ in. 984 mm 38 ¾ in. 1238 mm 48 ¾ in. 1543 mm 60 ¾ in. 1797 mm 70 ¾in. 1994 mm 78 ½ in.
Framing Procedure 1. Build frame according to framing dimensions on previous page and ensure power source is available 2. Remove front glass and trim piece, and set aside (refer to page 8 for instructions) 3. It is recommended to install the fireplace after finishing the wall to ensure the side brackets sits flush with the wall finishing Top View 4. After wall has been finished, place fireplace into wall framing and use framing screws to secure the side brackets to wall.
PLACING MEDIA ON FLAME BED Removing Front Glass 1. Locate the heater louver in the middle of the fireplace underneath the trim. Remove the heater louver by removing the two screws holding it in place, then remove front trim piece 2. Loosen and remove the two front glass clips under the trim. You can use the clips to hook on and remove the glass. Set glass aside in secure location.
3. For crystal effect: Carefully spread the small clear crystal stones across the fuel bed. Then evenly arrange the larger crystal stones starting along the inset window ledge at the front of the firebox. For log effect: Carefully spread the small clear and semi-painted crystal stones across the fuel bed. Arrange the logs and place the small semi-painted and clear crystal stones in between the log layout.
FIREPLACE REPAIR GUIDES For full detailed instructions and step-by-step guides on how to repair and service the fireplace, including repair and replacement of parts such as LED lights, motor, heater, etc, please visit our support website at: support.dynastyfireplace.
OPERATION This appliance can be operated by remote control and onboard buttons, however onboard buttons have limited functions. A beep should be heard when the power is first applied. 1. ONBOARD BUTTONS The onboard buttons are located under the trim on the top left. Heater Indicator WiFi Indicator Heater Flame Timer Press the Flame button to turn on/off the flame LED and cycle through flame brightness levels High/Medium/Low.
3. REMOTE CONTROL In order to protect the product from becoming too hot, there is a 10s delay when turning on the heater; also, there is a 10s delay when turning off the heater fan. l Make sure the batteries are installed properly in the remote control. l The effective range of the remote control is up to 4 meters or 13 feet.
OPERATION ALWAYS turn the heater OFF and unplug the power cord from the outlet before cleaning, performing maintenance, or moving this fireplace. Failure to do so could result in electric shock, fire, or personal injury. Cleaning NEVER immerse in water or spray with water. Doing so could result in electric shock, fire, or personal injury. Metal: l Buff using a soft cloth, slightly dampened with a mild cleaning solution if needed.
Maintenance Risk of electric shock! DO NOT OPEN! No user-serviceable parts inside! ALWAYS turn the heater OFF and unplug the power cord from the outlet before cleaning, performing maintenance, or moving this fireplace. Failure to do so could result in electric shock, fire, or personal injury. Electrical and Moving Parts: l The fan motors are lubricated at the factory and will not require lubrication. l Electrical components are integrated in the fireplace and are not serviceable by the consumer.
OPERATION This product is inspected, tested and carefully packaged to minimize the chance of damage during shipment. If a part within two years, or 24 months from the date of purchase proves to be defective in material or fabrication under normal use, the part will be repaired or replaced. Dynasty Fireplaces’ obligation under the warranty is to replace or repair defective parts at our discretion.
