Installation Guide

- 13 -
OPERATION
ALWAYS turn the heater OFF and unplug the power cord from the
outlet before cleaning, performing maintenance, or moving this
fireplace. Failure to do so could result in electric shock, fire, or personal
injury.
Cleaning
NEVER immerse in water or spray with water. Doing so could result in
electric shock, fire, or personal injury.
Metal:
l Buff using a soft cloth, slightly dampened with a mild cleaning solution if
needed.
l DO NOT use brass polish or household cleaners as these products will damage
the metal trim.
Glass:
l Use a good quality glass cleaner and dry thoroughly with a paper towel or lint-
free cloth.
l NEVER use abrasive cleansers, liquid sprays, or any cleaner that could scratch
the surface.
Plastic:
l Wipe gently with a slightly damp cloth and a mild cleaning solution and warm
water.
l NEVER use abrasive cleansers, liquid sprays, or any cleaner that could scratch
the surface.
Vents:
l Use a vacuum or duster to remove dust and dirt from the heater and vent areas.
l Clean the exterior of the fireplace with a slightly damp cloth or duster.