Operating instructions

Swim Spa Operator’s Guide
(XE) WIRING DIAGRAM - 14’, 16’, 18’
L1
L2
N
G
The XM Pack require 230volts for operation
TV Lift control
(White Wire
To the Spa)
liatgiP etihW
White Pigtail
Neutral Bar
raB lartueN
apS morF etihW
Spa
Wiring Requirements:
• 2-Hots, 1-Neutral, 1-Isolated Ground
• 0-40’ length, 4 Wire #6 AWG copper conductor
• Over 40’ length, 4 Wire #4 AWG copper conductor
Note: The white neutral wire from the back of the GFCI MUST be
connected to an incoming line neutral. The internal mechanism of
the GFCI requires this neutral connection. The GFCI will not work
without it.
ATTENTION!
IMPROPER WIRING WILL VOID WARRANTY
To:
(Check your local Electrical codes for 60 Amp GFI circuits
for correct wire size for some areas varry)
P1
P2
P1
P1
P1
L1
L2
N
G
Pump 1 & 2
Circ. pump
or Blower
12 Volt Power supply
Ozonator
L1
L2
N
G
230 Volt 60 Hz / most common
120 Volt 60 Hz / Select models w/120volt pump and heater set to 120volts
L1
L2
N
G
230 Volt 50 Hz 2x16 circuits
L1
L2
N
G
230 Volt 50 Hz 1x32 circuit
L1
L2
N
G
The XM Pack require 230volts for operation
TV Lift control
(White Wire
To the Spa)
liatgiP etihW
White Pigtail
Neutral Bar
raB lartueN
apS morF etihW
Spa
Wiring Requirements:
• 2-Hots, 1-Neutral, 1-Isolated Ground
• 0-40’ length, 4 Wire #6 AWG copper conductor
• Over 40’ length, 4 Wire #4 AWG copper conductor
Note: The white neutral wire from the back of the GFCI MUST be
connected to an incoming line neutral. The internal mechanism of
the GFCI requires this neutral connection. The GFCI will not work
without it.
ATTENTION!
IMPROPER WIRING WILL VOID WARRANTY
To:
(Check your local Electrical codes for 60 Amp GFI circuits
for correct wire size for some areas varry)
P1
P2
P1
P1
P1
L1
L2
N
G
Pump 1 & 2
Circ. pump
or Blower
12 Volt Power supply
Ozonator
L1
L2
N
G
230 Volt 60 Hz / most common
120 Volt 60 Hz / Select models w/120volt pump and heater set to 120volts
L1
L2
N
G
230 Volt 50 Hz 2x16 circuits
L1
L2
N
G
230 Volt 50 Hz 1x32 circuit
230 VOLT 60HZ/most common
22