Operating instructions
Swim Spa Operator’s Guide
K85 4 PUMP CONTROLS - 16’ & 18’
Pump 1 Pump 2 Pump 3/4
Econo Filter Up Down
Light
Press Pump 1 key to turn on Pump 1 on at a low speed. Press Pump 1 key a second time
to turn pump on at a higher speed. Press Pump 1 three times to turn pump off.
Pump 1
Pump 2 Pump 3/4
Econo Filter Up Down
Light
Pump 1
Pump 2
Pump 3/4
Econo Filter Up Down
Light
Pump 1 Pump 2
Pump 3/4
Econo Filter Up Down
Light
Pump 1 Pump 2 Pump 3/4
Econo Filter Up Down
Light
Pump 1 Pump 2 Pump 3/4
Econo
Filter Up Down
Light
Pump 1 Pump 2 Pump 3/4
Econo Filter Up Down
Light
Pump 1 Pump 2 Pump 3/4
Econo Filter Up Down
Light
Pump 1 Pump 2 Pump 3/4
Econo Filter Up Down
Light
Press Pump 2 key to turn on Pump 2 on at a low speed. Press Pump 2 key a second
time to turn pump on at a higher speed. Press Pump 1 three times to turn pump off.
Press Pump 3/4 key to turn on Pump 3/4 on at a low speed. Press Pump 3/4 key a
second time to turn pump on at a higher speed. Press Pump 3/4 three times to turn pump
off.
A quick press of the Filter key will allow you to display the clock. A long press of 5 seconds
will allow you to enter the program menu, as in the lter cycles, set the clock, etc.
Press Light Key to turn light on. Press light key a second time to turn off.
Press Econo Key to switch from normal mode to economy mode. To save energy, the
economy mode set point is 20˚F (11˚C) below the normal mode set point.
Use the Up or Down key to set desired water temperature.
The “Set Point” icon indicates that the display shows the desired temperature,
NOT the current temperature.
(applies to the 16’ and 18’)
30