Operating instructions

Swim Spa Operator’s Guide
Light
Filter
Up
Down
Econo
Pump 1
Pump 2
Pump 3
3
Pump 4
4
Light
Filter
Up
Down
Econo
Pump 1
Pump 2
Pump 3
3
Pump 4
4
Light
Filter
Up
Down
Econo
Pump 1
Pump 2
Pump 3
3
Pump 4
4
Light
Filter
Up
Down
Econo
Pump 1
Pump 2
Pump 3
3
Pump 4
4
Light
Filter
Up
Down
Econo
Pump 1
Pump 2
Pump 3
3
Pump 4
4
Light
Filter
Up
Down
Econo
Pump 1
Pump 2
Pump 3
3
Pump 4
4
Light
Filter
Up
Down
Econo
Pump 1
Pump 2
Pump 3
3
Pump 4
4
Light
Filter
Up
Down
Econo
Pump 1
Pump 2
Pump 3
3
Pump 4
4
Light
Filter
Up
Down
Econo
Pump 1
Pump 2
Pump 3
3
Pump 4
4
Light
Filter
Up
Down
Econo
Pump 1
Pump 2
Pump 3
3
Pump 4
4
Light
Filter
Up
Down
Econo
Pump 1
Pump 2
Pump 3
3
Pump 4
4
Light
Filter
Up
Down
Econo
Pump 1
Pump 2
Pump 3
3
Pump 4
4
Light
Filter
Up
Down
Econo
Pump 1
Pump 2
Pump 3
3
Pump 4
4
Light
Filter
Up
Down
Econo
Pump 1
Pump 2
Pump 3
3
Pump 4
4
The Pump 1 button - press PUMP 1 on at low speed. Press a second time to turn
pump on high speed. Press a third time to turn pump off. When at high speed, a built-
in timer turns pump off after 20 minutes and when at low speed after 2 hours, unless
manually deactivated rst.
The Pump 2 button - press PUMP 2 on. Press a second time to turn pump 2 off. A
built-in timer automatically turns pump off after 20 minutes, unless pump has been
manually deactivated.
The Light button - press LIGHT to turn light on. Pressing a second time turns off. A
built-in timer automatically turns light off after 2 hours, unless manually deactivated
rst.
The Econo button - press and hold ECONO key for 5 seconds to switch from normal
mode to economy mode. In economy mode, system maintains temperature at the
desired set point during lter cycles only. Set point is 20˚f (11˚c) below the normal
mode set pointe for the rest of the time. In economy mode, the display will toggle
between the current water temperature and the “econo” message.
The Filter button - press and hold FILTER key until the display show “xx”,
representing the currently set lter cycle duration in hours.
The Up button and the Down button - use UP OR DOWN arrow keys to regulate
water temperature. The temperature setting will be displayed for 5 seconds to conrm
your new selection.
The “set point” indicator displays the desired temperature, not the current water
temperature!
Water temperature can be adjusted by 1˚ increments from 59 to 104˚ f (15˚ to 40˚ c).
Press and hold light key for 5 seconds to display water temperature in either
fahrenheit (˚f) or celsius (˚c).
GENERAL XE TOPSIDE CONTROL TERMINOLOGY
35