Operating instructions

Swim Spa Operator’s Guide

GENERAL SWIM SPA MAINTENANCE

Proper Maintenance For Your Swim spa Pillows

• Your swim spa pillows need to be rinsed periodically to remove any chemical residue.

This should help to eliminate pillows becoming stiff and discolored.

• If swim spa is not to be used for a period of time, pillows should be removed. Pillow life will

be extended.

Proper Maintenance For Your Swim spa Fountain Jets

• In order to keep your fountain jets operating properly, follow these instructions in sequence:

• Turn off fountain jets

• Remove outer ring by turning face counter clockwise

• Remove internal jet insert with a pair of needle nose pliers.

• Clean plastic lter at the back of the jet insert so all holes are free of debris.

• Reinstall jet insert and outer ring.

Please note: We do not recommend the fountain jets be left on when swim spa cover is closed, this

may damage your swim spa cover.

Proper Maintenance For Your Swim spa Surface

Quarite Plus

Disclaimer: This swim spa may be insulated with high-density urethane foam for

structural support and energy efciency. When empty of water and left in direct sunlight without the

swim spa cover in place, the swim spa is vulnerable to ultra violet or solar damage. Temperatures

generated by sunlight that become concentrated in the shell surface cause the shell material to

delaminate from the urethane foam backing. This occurrence is considered abuse and may result

in surface blisters, bubbles or large layer delamination. This occurrence is not covered under war-

ranty. The swim spa cover must be kept on the swim spa while empty of water.