Operating instructions

Swim Spa Operator’s Guide

GENERAL SWIM SPA MAINTENANCE

Because your swim spa holds a relatively small amount of water, contaminants such as body oil,

perspiration, dirt, hair, etc., may become quite concentrated. For this reason, the water should be

drained and replaced every three months depending on use.

• Turn off power at the breaker.

• Hook up a garden hose to the hose bib located on the exterior drain

of the cabinet. To access the hose bib, pull the cap out and

turn counter clock wise to remove the cap. Attach hose to the drain.

• When water begins to drain out of the hose, be sure to drain the water

to a convenient place.

After draining is completed, turn the hose bib off by pushing in and turning clockwise one half turn.

Remove the hose. Wipe down the inside of your swim spa making sure your surface is dry and free

from standing water. We recommend that after draining or cleaning your swim spa that you put the

cover back on. Avoid exposing the acrylic surface to direct sunlight for an extended period of time.

Extended exposure can cause surface fading or cracking, which could void the acrylic warranty.

NOTE!

Note: Be sure that hose is on a downward grade to properly drain swim spa.

DRAINING YOUR SWIM SPA