TM Owners Manual For Deluxe System D-1000 Premier System D-2000 Elite System D-3000
O Ow w nn ee rr '' ss II nn ff oo rr m m aa tt ii oo nn Dealer Company Address Phone E-Mail Installer Company Address Phone Warranty Turned In / Date Model Serial Number Equipment Pack Color Date of Delivery We Appreciate your business and our sincere desire is that you receive years of pleasure and therapy from your Dynasty Spa. Please call your local Dynasty Spa Dealer if you have any questions or problems.
TM D D yy nn aa ss tt yy SS ppaa ss O Ow w nn ee rr ss M M aa nn uu aa ll Table Of Contents Owners Information............................ 2 Safety Instructions.............................. 5 Basic Introductory Information........... 7 Set-Up & Delivery Guidelines............. 8 Wiring Diagram................................... 10 Pre-Operation Instructions................. 11 D-1000 Control System....................... 12 D-2000 Control System....................... 14 D-3000 Control System.............
Dear Dynasty Spa Owner: Congratulations on your purchase of a new Dynasty Spa. You now possess the ultimate passport to tranquility - a miniature vacation at home, ready and waiting for you in your own backyard! We want you to enjoy your Dynasty Spa. Many hours of research have gone into the design of your spa, to ensure the ultimate in hydrotherapy and relaxation. Only the highest quality components have been used, to ensure years of trouble-free operation.
Important Safety Instructions When installing and using this electrical equipment, basic safety precautions should be followed, including the following: 1) READ AND FOLLOW ALL INSTRUCTIONS. 2) WARNING: To reduce the risk of injury, do not permit children to use this product unless they are closely supervised at all times. Keep Spa cover locked when not in use. 3) A wire connector is provided on 220 V units to connect a minimum No. 8 AWG (8.
Important Safety Instructions Persons suffering from obesity or with a medical history of heart disease, low or high blood pressure, circulatory system problems, or diabetes should consult a physician before using a spa. Persons using medication should consult a physician before using a spa since some medication may affect heart rate, blood pressure, and circulation.
Ba sic Introductory Information Congratulations on the purchase of your new spa. Our purpose is to provide you with a warm and relaxing spa which incorporates a soothing water massage. In order to maximize the pleasure of your spa, you will need to understand how it works. The following operating and maintenance instructions are very important and must be followed carefully. With proper care and maintenance your spa will provide you with years of satisfaction with minimum effort.
Set-up & Delivery Guidelines Getting Ready For Delivery & Set-up Of Your New Spa Surface And Pad Requirements Your new portable spa must be placed on a uniformly firm, flat, and level surface. A concrete pad 4 inches thick is best. If your spa is located near sprinklers, adjust or cap them so as not to hit the siding of the spa. Balconies And Deck Requirements Decking must be constructed to support 85 pounds per square foot. Balconies must be constructed to meet current state and local codes.
Set-up & Delivery Guidelines Getting Ready For Delivery & Set-up Of Your New Spa Wiring Requirements (Cont.) Extension Cords are not to be used in conjunction with operation of the spa. Low voltage damage could result, which is not covered by warranty. If you have any doubts, have your electrical system checked by a qualified electrician. It is the customers responsibility to acquire necessary permits, to arrange for installation and hook up of the electrical power.
Wiring Diagram Factory Recommended G.F.C.I Load Center Wiring Note: The white neutral wire from the back of the G.F.C.I MUST be connected to an incoming line neutral. The internal mechanism of the G.F.C.I. requires this neutral connection. The G.F.C.I. will not work without it. House Breaker Box RED (HOT) BLK (HOT) GRN WHT G.F.C.I. Breaker Box Bottom View of .C.I. G.F (Square D) Front View of G.F.C.I.
Gener al Pre-Oper ation Instructions Priming Pump For Electric Packs The Power pack system is located under the wood skirt. The equipment can be serviced by simply opening the doors. It is important to make sure that all of the air is out of the equipment pack before operating.
To p S i d e C o n t r o l I n s t r u c t i o n s Depending on the Dynasty Spa model you purchased, you'll have different options available to you with Dynasty's digital controls. The operations of your hot tub can be enjoyed at the touch of a button. This section is designed to walk you through the details of the operation of the Dynasty 1000, 2000 & 3000 controls.
To p S i d e C o n t r o l I n s t r u c t i o n s Preset Filter Cycles Your spa will automatically filter itself twice each day. The first filter cycle will begin 1 minute after the spa is energized. The second filter cycle will begin 12 hours after the start of the first filter cycle. Filter duration is programmable at the topside panel for 0, 1, 2, 3, 4 or 12 hours. The default filter time is 2 hours. To program, press the or pad, then the pad. Continue to press the or pad to select the filter duration.
To p S i d e C o n t r o l I n s t r u c t i o n s D - 2000 System Initial Start-up When your spa is first powered up, it will automatically heat and maintain 100 F until you change the set temperature. Temperature Adjustment Press the pad to display the temperature setting. The set temperature is flashed on the display. In a few seconds, the numbers will stop flashing, and the display will show the actual water temperature.
To p S i d e C o n t r o l I n s t r u c t i o n s Preset Filter Cycles (cont.) 1 minute after the spa is energized. The second filter cycle will begin 12 hours after the start of the first filter cycle. Filter duration is programmable at the topside panel for 0, 1, 2, 3, 4 or 12 hours. To program, press the SET pad, then the JETS pad. Press the SET pad again and F2 will be displayed on the panel. (F2 is the default filter time and indicates a 2 hour cycle).
To p S i d e C o n t r o l I n s t r u c t i o n s D - 3000 System D - 3000 System auxiliary panel (optional) Initial Start-up When your spa is first powered up, it will automatically heat and maintain 100 F until you change the set temperature. Temperature Adjustment The current temperature is constantly displayed on the LCD. Press either or pad once to display the set temperature. (The temperature is designated by a triangle in the upper left corner.
To p S i d e C o n t r o l I n s t r u c t i o n s Circulation Pump (optional) When the water is at set temperature or below, the circulation pump (if installed) runs 24 hours a day. However, it turns off a 2 F above set temperature and comes back on for 1 hour every 3 hours until it reaches set temperature again. Blower (optional) Press the pad once to turn the blower on high. Press a second time, blower is on low speed. Press a third time to turn off.
To p S i d e C o n t r o l I n s t r u c t i o n s Diagnostic Messages OH StAn EcoN FLO Overheat Protection (Spa is deactivated) DO NOT ENTER THE WATER. If the spa water has reached 112 F, remove the spa cover to cool the water. Overheating may occur if the filter cycle is set too long. At 110 F, the spa should reset itself. If the high limit sensor detects 118 F at the heater, the spa will shut down. When the heater cools to 110 F, press any button to reset the spa.
A i r Ve n t u r i e s & D i ve r t e r Va lve C o n t r o l s Mini Diverter Valve This valve will allow the water flow control of neck and shoulder jets located in the trilogy / ultrassage seats. A simple turn of the pointer toward the seat will increase to the maximum output allowed. Another turn of the point - away from the seat will decrease / turn off the neck / shoulder jets. Each individual jet is also independently adjustable.
Fi lt e r L o c at i o n Single Filter Single Filter Location Dual Filter Dual Filter Location Note: The filter should be inspected and cleaned on a monthly basis.
Fi lt e r M a i n t e n a n c e Filtration starts as soon as flow is steady through the filter. The filter cartridge removes the dirt from the spa water, the accumulated dirt causes flow resistance. A dirty cartridge will decrease flow and may cause spa not to heat properly. Therefore, regular filter cleaning is important. Cleaning and Replacing Filter Cartridge Your Dynasty Spa filter has been designed for quick and easy maintenance. Turn off power at the breaker.
K e e p i n g Yo u r S pa W at e r C l e a n & Fr e s h Cleaning Your Spa Water You need to keep you spa clean and ready to use. When you enter your spa, you bring in as much contaminant as 50 people would in a normal size swimming pool! Because your spa is such a small, enclosed environment, it needs to be a sanitary place.
K e e p i n g Yo u r S pa W at e r C l e a n & Fr e s h 4) pH STABALIZER - It will properly adjust and hold the pH for up to 3 months Water Testing Your Dynasty dealer is equipped to perform a thorough analysis of your spa water. Take a one liter sample to the store and they will advise you on the products necessary to properly balance and care for your spa. Unbalanced spa water can quickly damage your equipment. Your Dynasty dealer will advise you on how to protect your investment.
K e e p i n g Yo u r S pa W at e r C l e a n & Fr e s h An Overview Monthly - For Equipment Protection CALCIUM BOOSTER (If Needed) - Calcium booster treats the water if low calcium hardness is a problem in your area. It will help prevent equipment corrosion and foaming by raising the spa's water hardness level to an acceptable range of 120 ppm. Filter Cleaning To keep your filter free of grease, grime, and oil. Clean the filter with SPA CARTRIDGE FILTER CLEAN. One 16 oz.
K e e p i n g Yo u r S pa W at e r C l e a n & Fr e s h An Overview As Needed (cont.) Skin Conditioning To prevent dry skin, pour SKIN SOFTNER directly into the spa. It smoothes and moisturizes. Algae Control For spas with green or yellow algae, use SPA ALGAECIDE to kill and prevent further algae growth. Do not leave your water treatment products outside. If they are subject to extreme heat or cold, their effectiveness can be impaired making them unusable.
D r a i n i n g Yo u r S pa Because a spa holds a relative small amount of water, contaminants such as body oil, perspiration, dirt, hair, etc., may become quite concentrated. For this reason, the water should be drained and replaced every three months depending on use. Turn off power at the breaker. Hook up a garden hose to the hose bib located in spa equipment area or on the exterior side cabinet. When water begins to drain out of the hose, be sure to drain the water to a convenient place.
W i n t e r i z i n g Yo u r S pa In areas of the country where the temperatures drops below 32 degrees F, it is important to follow these directions 1) If the spa is not going to be used, drain completely and store in garage or some type of storage facility. Be sure all water is removed. 2) Do not turn unit off with water in the spa. Frozen water may rupture plumbing, and will not be covered under warranty.
Wi n t e r i z i n g S pa Cove r s Proper Maintenance For Your Dynasty Spa Cover 1) Use a soft broom to remove accumulation after every snowfall or ice storm 2) Splash cool tap water on the hardware to free them if they become frozen shut. WD-40 will keep the lock free, but apply carefully because it can damage the cabinet finish. 3) We recommend a good treatment with Vinyl Conditioner before your first snow or ice. If possible, treat during the winter too. 4) Monitor your water chemistry.
Trouble Shooting Guide No heat or heat too low Probable Cause #1 Action Dirty Filter Clean Filter / Pull Filter and try running without filter Probable Cause #2 Action Breaker at house off. Reset breaker at house. Breaker can appear to be on and one pole can be off. Turn breaker OFF then ON twice. Pump not primed. Refer to the section of this manual on pump priming Probable Cause #3 Action Probable Cause #4 Action Improper line voltage. Have a Licensed Electrician check the line voltage.
Trouble Shooting Guide (cont.) Low water flow Probable Cause #1 Action Dirty Filter Remove filter cartridge and clean. Probable Cause #2 Action Closed gate valves or blocked lines. Open all gate valves. Probable Cause #3 Action Low voltage or incorrect voltage Have a Licensed Electrician check the line voltage Spa is leaking Probable Cause #1 Action Loose connection. Hand tighten all disconnects and fittings. Check joints and unions Motor does not run Probable Cause #1 Action No power to motor.
G lo s s a ry o f Te r m s Air Blower The air blower supplies air to the jets creating a hydro massage action Air Loop A back up system for the check valve, prevents water from entering air blower Air Venturi Mounted on the lip of the spa or at the equipment shroud, to induce air to the jets Cabinet The redwood or Dynalast foam that surrounds the spa, also called a skirt. Check Valve Prevents water back flow to blower. Control Panel Mounted on the lip of the spa.
G lo s s a ry o f Te r m s ( c o n t . ) pH Stands for "Potential for Hydrogen" This is the term used to describe the acid (low pH) or alkalinity (high pH) condition of the water. The ideal pH for spa water is 7.5 Skimmer This is the circular outlet at the water level. The skimmer removes surface debris to the filter. The water level in the spa should be kept at 2" above the skimmer for optimum operation.
S pa M o d e l s D e ta i l R e f e r e n c e Ch a rt Model Jets Dimensions Gal.