Specifications

18 Infusion Device Analyzer
Ordering information
IDA 4 Plus One-Channel Infusion
Device Analyzer
IDA-4P/1-US120V United States, 120 V
IDA-4P/1-AUS250V Australia, 250 V
IDA-4P/1-DEN250V Denmark, 250 V
IDA-4P/1-SHK250V Schuko, 250 V
IDA-4P/1-ISR250V Israel, 250 V
IDA-4P/1-ITAL250V Italy, 250 V
IDA-4P/1-IND250V India, 250 V
IDA-4P/1-SWZ250V Switzerland, 250 V
IDA-4P/1-UK250V United Kingdom, 250 V
IDA-4P/1-BRAZ Brazil
IDA 4 Plus Two-Channel Infusion
Device Analyzer
Full testing for up to two infusion pumps
simultaneously
IDA-4P/2-US120V United States, 120 V
IDA-4P/2-AUS250V Australia, 250 V
IDA-4P/2-DEN250V Denmark, 250 V
IDA-4P/2-SHK250V Schuko, 250 V
IDA-4P/2-ISR250V Israel, 250 V
IDA-4P/2-ITAL250V Italy, 250 V
IDA-4P/2-IND250V India, 250 V
IDA-4P/2-SWZ250V Switzerland, 250 V
IDA-4P/2-UK250V United Kingdom, 250 V
IDA-4P/2-BRAZ Brazil
IDA 4 Plus Three-Channel Infusion
Device Analyzer
Full testing capability for up to three
infusion pumps simultaneously
IDA-4P/3-US120V United States, 120 V
IDA-4P/3-AUS250V Australia, 250 V
IDA-4P/3-DEN250V Denmark, 250 V
IDA-4P/3-SHK250V Schuko, 250 V
IDA-4P/3-ISR250V Israel, 250 V
IDA-4P/3-ITAL250V Italy, 250 V
IDA-4P/3-IND250V India, 250 V
IDA-4P/3-SWZ250V Switzerland, 250 V
IDA-4P/3-UK250V United Kingdom, 250 V
IDA-4P/3-BRAZ Brazil
IDA 4 Plus Four-Channel Infusion
Device Analyzer
Full testing capability for up to four
infusion pumps simultaneously
IDA-4P/4-US120V United States, 120 V
IDA-4P/4-AUS250V Australia, 250 V
IDA-4P/4-DEN250V Denmark, 250 V
IDA-4P/4-SHK250V Schuko, 250 V
IDA-4P/4-ISR250V Israel, 250 V
IDA-4P/4-ITAL250V Italy, 250 V
IDA-4P/4-IND250V India, 250 V
IDA-4P/4-SWZ250V Switzerland, 250 V
IDA-4P/4-UK250V United Kingdom, 250 V
IDA-4P/4-BRAZ Brazil
Included accessories
48456 Electronic Users Manual and
HydroGraph software
49964 20 ml Priming Syringe
48457FG Luerlock-3 way (one for each
channel)
76044 5-foot Plastic Drain Line
75029 Null Modem Cable (female DB9 to
female DB9)
Detachable Power Cord (country specific)
Optional PCA Trigger Box
Electrical specifications
Supply voltage Autoswitching 90 V ac to 260 V ac
Supply frequency 50 Hz to 60 Hz
Supply power < 30 VA
Fuse 20 mm 250 V, 1 A (T) (slow blow)
Earth leakage current < 1 mA in single fault condition
Environmental conditions
Operating temperature 15 °C to 30 °C (59 °F to 86 °F)
Storage temperature 0 °C to 40 °C (32 °F to 104 °F) at 85 % RH or less for storage
(Do not leave for more than 48 hours at -20 °C/-4 °F)
General information
Dimensions (LxWxH) 19.05 cm x 18.11 cm x 30.18 cm (7.5 in x 7.2 in x 11.9 in)
Weight 5 kg (11 lb)
HydroGraph™ Graphics Software
Use the moving color visual advantage of
HydroGraph to troubleshoot up to four infusion
pumps at once. Data is taken directly off the
transducer and transmitted to HygroGraph. The
flowing graphs provide an electronic means
to display, store, and recall flow patterns for
comparison at a later date. Each test window
can display instantaneous and average flow
rates, cumulative, and bolus volumes; and
occlusion pressure.
IDA 4 Plus
Multi-Channel Infusion Device Analyzer
Specications
riešenia na presné meranie
http://www.elso.sk