Product Manual

GENERAL SPECIFICATIONS
DYNATRON
®
125 | OPERATOR’S MANUAL REV. 3 | 8/29/2017 37
Routine Ultrasound Inspections for the Dynatron 125
Government agencies regulate the frequency at which Ultrasound units must have their calibration checked. e device must
still be examined at the periodic intervals specied by the governing agency for the country in which the device is used. To
have the inspection performed by Dynatronics, contact Dynatronics’ Customer Service Department. e device will need to be
shipped to Dynatronics for the inspection. As an alternative, these periodic checks may be performed in your own locale by an
independent contractor, who is expert in checking the calibration of Ultrasound equipment. e calibration procedure MUST
be performed by a qualied Ultrasound technician using the proper equipment, and is recommended every 6 to 12 months.
Returning a Unit for Repair
BEFORE sending a device to Dynatronics for service, you must FIRST obtain a return authorization number. Call
Dynatronics’ Customer Service Department at [phone] and discuss any problems or required service to save time
and ensure the machine is returned to you as quickly as possible.
Autorización de Retorno
e following information will need to be supplied when calling Dynatronics’ Customer Service to obtain a return Service
Order Number (SVO):
1. User name and address
2. User phone number
3. Serial number of the unit
4. A description of the problem with the unit
Aer receiving the Service Order Number (SVO), the number should be clearly written on the outside of the shipping container.
Packaging and Shipping of Replacement Parts
All defective or broken parts should be shipped back to Dynatronics in the original shipping container. ese containers are
designed to withstand the punishment of shipping. If the original containers are not usable, nd containers that are similar
in protection so damage in shipping will be prevented. e person or company sending the unit to Dynatronics is responsible
for any shipping damage resulting from a poorly packaged part or unit.
CAUTION
For continued protection against risk of re, replace fuses only with type IEC 60127. For 120/240VAC
supply, use 250V, 1.6A slow-blow.