User Manual

8. Warranty
Dynaudio Acoustics BM14S 13
Changing the fuse
The fuse is placed on the rear of the subwoofer below the mains power input. It can
be changed without removing the amplifier module.
To change the fuse:
1. Switch off the mains power switch and unplug the power cable.
2. Pull out the fuse holder
3. Replace fuse with same type and rating
4. Push fuse holder back firmly until it is locked into position.
8. Warranty
Dynaudio Acoustics provides a transferable one-year limited manufacturer’s
warranty.
This warranty only covers faults or defects in material and production. Damage
caused as a result of abuse, misuse or defective associated electronics is not covered
by the warranty.
All warranty claims must be accompanied by a copy of the original purchase invoice
and warranties are only valid in the country or market of original origin and distribution.
Should warranty service be required, it must be arranged for in the country of
purchase by an authorized Dynaudio Acoustics dealer.
WARNING
Risk of fire due to wrong fuse type!
Inserting the wrong fuse type can lead to overheating of the subwoofer.
X For continued protection against risk of fire, replace only with same type fuse
and rating.