Owner’s Manual Xeo Hub / Extender / Link / Dynaudio Connect English DVNAUDIO
All Apple products are trademarks of Apple Inc. All Sony products are trademarks of Sony Electronics Inc. All Sonos products are trademarks of Sonos Inc. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. All Google products are trademarks of Google Inc. Other trademarks and trade names are those of their respective owners. An update to this manual may be necessary due to product improvements and new functions.
Thank you for choosing Dynaudio Xeo. Xeo combines the latest wireless technology with impressive sound quality and makes listening to music truly comfortable and easy. The next few pages contain important information on connecting the system and its operation to ensure perfect function and the best-possible sound quality. We hope you have a great time listening to your favorite music, Dynaudio About this products Xeo consists of several high-quality components that are optimally matched.
Table of Contents Important Safety Instructions 5 Unpacking Packaging material 7 7 Xeo Link Connections and control elements Connection Division into audio zones 21 21 22 23 Disposal 7 Malfunctions 24 Scope of delivery Xeo Hub / Dynaudio Connect Xeo Extender Xeo Link 8 8 9 9 Technical data 25 Annex Connection options for Hub/Connect Declaration of Conformity (EU only) Reminding (USA and Canada only) IC NOTICE MPE Reminding 26 26 28 29 30 30 The Xeo system Components Combination examples Remo
Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer‘s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9.
Power supply unit WARNING RISK OF ELECTRIC SHOCK! DO NOT OPEN! When plugged in, a dangerous electrical voltage is present inside the housing of the supplied Xeo power supply unit. ►► To reduce the risk of electric shock, do not open the power supply unit and do not expose it to rain or moisture. No user serviceable parts inside. ►► Refer servicing to qualified personnel. ►► Make sure that the housing is not damaged. Exchange the power supply unit for a new one if it has been damaged.
Unpacking After unpacking, make sure the system is complete and check the device and all accessories for transport damage. Transport damage may be expected if the packaging is already severely harmed. Do not attempt to commission a damaged device. If the contents are incomplete or damaged, please contact your Dynaudio Xeo distributor. Distributor addresses can be found in the Internet at www. dynaudio.com.
Scope of delivery Xeo Hub / Dynaudio Connect ---- Connect 1 Xeo Hub or Dynaudio Connect 1 Xeo power supply unit (country-specific version), Hub: micro USB, Connect: DC jack 1 stereo analog cable (jack 3.5 mm – 3.5 mm, length: 1.5 m) 1 stereo analog cable (RCA – RCA, length: 1.5 m) 1 optical digital cable (Toslink – Toslink, length: 1.5 m) 1 USB cable (Hub: USB – mini USB, Connect: USB – micro USB, length: 1.
Xeo Extender ' 0VNAUD1o' ·' 1 Xeo Extender 1 Xeo power supply unit with micro USB cable (country-specific version) 1 Xeo first time setup manual (quick guide for installation, not shown) Xeo Link DVNAUDIO ·' 1 Xeo Link 1 Xeo power supply unit with micro USB cable (country-specific version) 1 stereo analog cable (RCA – RCA, length: 1.5 m) 1 optical digital cable (Toslink – Toslink, length: 1.
The Xeo system Components . 10 DVNAUDIO . . Xeo Hub The Xeo Hub is the control center for the Xeo system. Signal sources such as tuners, receivers, CD players, TVs, streaming clients, network players, MP3 players, or computers are connected to it. Signals are sent via radio from the Hub to the speakers (or Xeo Link) where they are then played back.
Combination examples Below you will find several examples of Xeo component combinations. The high level of flexibility in the Xeo system enables even more variants. Ask your Dynaudio distributor to find the perfect solution for your needs. With Hub or Connect: Analog/digital audio sources + Hub or Connect + Xeo speaker . ---- ...
Connection and operation This section describes the connections and control elements for the Xeo components. Please contact your Dynaudio Xeo distributor if you have any problems with connection and start-up. Distributor addresses can be found in the Internet at www.dynaudio.com. Remote control The Xeo remote control can be used to turn the speakers on and off, change the volume, and select a Hub/Connect and its connected signal sources. Commands will always apply to both of the speakers.
Xeo Hub Connections and control elements Front plate •·~ 1 ·' DVNAUDIO 1 Operational state = connection to a speaker, Extender, or Link = searching for a connection, • = no connection Rear plate – inputs 1 . 0 ()) , Aux In Input for cable with stereo jack (3.5 mm stereo) Connect devices here that have an output for the stereo jack. Line In Input for cable with RCA plug Connect devices here that have an output for the RCA plug.
Rear plate – other connections and control elements . ,, Q OJ I , ~ 1· "''"' I :._.- _ ; ~ Ethernet Network connection Intended for future use. Id Transmission channel If you assign an ID, you can select the desired Hub from several Hubs using the remote control. In addition, each ID has its own transmission channel: A = 2.4 GHz, B = 5.2 GHz, C = 5.8 GHz.
Dynaudio Connect Connections and control elements Front plate I 1 . 1 D\fNAUDIO . 2 I I 2 . 3 3 Bluetooth Operational state 0 = not connected, 0 = connected, 0 -•- = pairing mode ,1,, -'I' = connection to a speaker, Extender, or Link -•- = searching for a connection, •= no connection 'I,, -'I' WiFi 0 = not connected, 0 = connected, ..
Rear plate – other connections and control elements 00 ~ 0 o - ~ Bluetooth Setup Key for Bluetooth setup ► Press to start Bluetooth setup (see “Bluetooth setup” on page 17). WiFi Setup Key for WiFi setup ► Press to start WiFi setup (see “WiFi setup” on page 18). Id Transmission channel If you assign an ID, you can select the desired Hub from several Hubs using the remote control. In addition, each ID has its own transmission channel: A = 2.4 GHz, B = 5.2 GHz, C = 5.8 GHz.
Connection 1. Connect your signal source to the appropriate input on the Connect. For a selection of signal sources and options for connecting to the Connect see “Connection options for Hub/Connect” on page 26. 2. Connect the Connect to the mains voltage using the POWER connection and the Xeo power supply unit. Do not use a different power supply unit! 3. Connect power to your speakers and power on speakers. 4. Select A, B or C on your remote control.
WiFi setup 1. F Setting up WiFi is necessary when using a WiFi connection for the first time. Setting up WiFi: 4 PC/Mac Sound Card 0 Bluetooth Setup B CJ Coax In A C WiFi Setup USB In Id 2. Service 1. Press and hold the WiFi setup button for 3 seconds. ▼▼ Connect is now searchable from an external device. ▼▼ The WiFi light (3) on the front (see “Front plate” on page 15) starts blinking slowly. 2. Find Dynaudio Connect in your list of WiFi devices and connect to it. 3. Enter http://192.168.1.
Xeo Extender Connections and control elements Front plate I I ., 0 DVNAUD1o' 1 Reception status 0 = connected to a Hub/Connect, 2 Transmission status 0 = connected to a speaker or Link, I 1 + 2 2 ,1,, = no connection possible -•- 1 Id error • -'I' ,1,, = no connection possible -•-'I' = The same ID was selected for Hub Id In and Extender Id Out. This is not permitted. Rear plate Note: Hub / Connect / Extender / Link Extender Id Out Transmission ID to speaker ►► Select a ID.
Connection Hub/Connect DVNAUDIO Extender ·>) ·>) 1. Connect the Power socket to the voltage supply via the Xeo power supply unit. Do not use a different power supply unit! 2. Select the same ID on the Hub/Connect and Extender for the Hub Id In. E.g. Hub/Connect: Id = B → Extender: Hub Id In = B. 3. Select any (other) ID on the Extender for the Extender Id Out. It may not be identical to the Hub Id In. E.g. Extender Id Out = C Notes: Two Extenders may also be used in a sequence. Select e.g.
Xeo Link Connections and control elements Front plate I,.____ 1 ·' DVNAUDla° 1 u 2 u oI _. Hub / Connect / Extender / Link Operational state = an audio signal is played back, = connection but no audio signal, = no connection to a Hub/Connect or Extender, • = standby mode Rear plate Coax Out Output for electrical digital cable ►► Connect devices here that have an electrical digital input (coax).
Connection Hub/Connect DVNAUDIO Link ·>) 1. Connect the Power socket to the voltage supply via the Xeo power supply unit. Do not use a different power supply unit! 2. Select an audio zone: Red, Green, or Blue. Use one of the outputs to connect Xeo Link with one of the active components, e.g. the active subwoofer Dynaudio Sub 600. 3. Select the desired signal source with the remote control and control the volume.
Division into audio zones Speaker Id Red Green Blue Speaker Id Red Green Blue Speaker Id Xeo Link (as well as the Xeo speakers) can be assigned to audio zones using the Zone selector switch. All components assigned to the same zone can be operated together via the remote control. Red Green Blue Green Zone Red Zone Zone Blue The picture shows a possible zone configuration.
Malfunctions Interruptions, clicking noises, or other audible interference when playing music is usually not caused by the radio transmission in the Xeo system. Often other external causes influence the transmission quality. Below are a few tips for improving transmission quality: 1. 2. 3. 4. Position all radio transmitters and receivers away from each other. WLAN devices, radio receivers, and radio systems may influence each other if they are too close together.
Technical data Technical specifications Dynaudio Connect Signal frequencies Sampling rate for digital inputs Input voltage (typ.) Input impedance Voltage supply (Adapter) Power consumption (max. / min.) Weight Dimensions (W x H x L) I Xeo Hub II Xeo Extender II Xeo Link A: 5.2 Ghz (Low), B: 5.2 Ghz (High), C: 5.8 Ghz (if available) up to 24 bit/96 kHz 16 bit/48 kHz RCA: 2 Vrms, Minijack: 1 Vrms RCA: 11.4 kΩ, Minijack: 8.2 kΩ 100 – 240 V, 5 V, 2 A – – – – – – 100 – 240 V, 5 V, 1 A 7 W / 4.
Annex Connection options for Hub/Connect Below you will find a selection of signal sources and options for connecting to the Xeo Hub or Connect. Your signal source Notebook, Mac™, PC Smartphone, other portable devices Astell&Kern PonoPlayer Docking station, network client, Sonos, Bluesound, etc. Google Chromecast Audio Signal source output Xeo Hub input Cable (source – Hub) Notes * The Hub works as a sound card.
Your signal source Signal source output Xeo Hub input Cable (source – Hub) Notes Analog radio, digital radio Line out Optical* 1: Line in RCA – RCA * If available 2: Optical In Toslink – Toslink Analog record player Line out* 1: Line in RCA – RCA * On phono preamplifier TV Headphones 1: Aux in Minijack 3.5 mm – 3.5 mm Select a variant.
Declaration of Conformity (EU only) Dynaudio A/S hereby declares, that the products Xeo Hub, Xeo Extender, Xeo Link, and Dynaudio Connect are in conformity with the following directives: • • • • 2001/95/EF (Product Safety) 2004/108/EF (EMC) 1999/5/EC (R&TTE) 2011/65/EU (ROHS) The Declaration of Conformity is available on the Internet at www.dynaudio.
Reminding (USA and Canada only) A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. This device complies with Part 15 of the FCC Rules.
IC NOTICE This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d‘Industrie Canada applicables aux appareils radio exempts de licence.
All there is. DVNAUDIO Dynaudio A/S, 8660 Skanderborg, Denmark Sales & Marketing: Dynaudio International GmbH, Ohepark 2, 21224 Rosengarten, Germany, Phone: +49 4108 - 41 80 - 0 www.dynaudio.com © Dynaudio International GmbH, Xeo Owner’s Manual 1215 EN. All text and image copyrights reserved. Subject to change without notice.
Connect series The Dynaudio Connect series offers a new level of wireless connectivity and convenience. Now, you can send a lossless digital signal and connect your Xeo and Focus XD loudspeakers wirelessly.
. , .• DVNAUDIO DVNAUDIO ·oVNAuo10 Hub Link Extender DVNAUDIO . . . Connect Connect series Data Hub Link Extender Connect Analog inputs Aux in/line in - - Aux in/line in Analog outputs - Line out - - Digital inputs Optical/coaxial/USB - - Optical/coaxial/USB/ Wi-Fi/Bluetooth Digital outputs - Optical/coaxial - - Wireless 16-bit/48kHz 16-bit/48kHz input 16-bit/48kHz input/output Accepts up to 24-bit/96kHz Maximum power consumption 4W 4W 4W 8W Weight 0.2kg/0.
Connect Designed and engineered by Dynaudio Labs in Denmark Learn more, get the latest tips and tricks and read our reviews on dynaudio.com and facebook.com/dynaudiogroup DVNAUDIO Dynaudio A/S Sverigesvej 15 8660 Skanderborg Denmark dynaudio.com Product Series Insert, Connect, Item no.
