Owner's Manual

04
The initial set-up of a Dynaudio loudspeaker is relatively easy. Please
take your time reading the guidelines and more detailed instructions
on the following pages of this manual after completing the first four
steps as listed below.
1. Unpacking. Carefully remove the loudspeaker from the packaging
and position it with its underside on the floor. Remove the white
cloth cover around the loudspeaker. We suggest that you keep the
box and white cloth for future use.
2. Positioning. Place the loudspeaker facing the listening area at its
desired position in the room. Remove the foam plugs from the rear
bass reflex port (if provided with your loudspeaker model).
3. Connecting. While the amplifier is switched off, connect each
loudspeaker to the amplifier with the speaker cable. Turn the
volume level all the way down and power the amplifier on.
4. Listening. The loudspeaker is now ready to play. Optimal perfor-
mance will only be realized after careful positioning and running-
in the speakers as described over the course of the following
pages. Enjoy your new Dynaudio loudspeakers!
Feel free to contact the Dynaudio Customer Service department with
any further questions or for additional assistance.
www.dynaudio.com/support
Unpack
Set up
Plug in
Introduction