Owner's Manual

Rear speakers
The rear speakers are responsible for the rear sound effects behind the listening posi-
tion. When using the compact models as rear speakers, the speakers can be placed
into a shelf, mounted at the rear wall or placed on a stand. This allows you a wide variety
of placements, even if your listening room and furniture limit a optimal setup.
Corresponding to the surround format 5.1 or 7.1, you need to install additional
speakers:
1. 5.1: The standard multi-channel setup with two rear speakers.
2. 7.1: Two speakers are added on both sides between the front and rear speakers.
Subwoofer
Most often a subwoofer will be utilized for the LFE-signal, especially in larger listening
rooms. The position of the subwoofer will be dependent upon the size of the room and
its acoustics. Please refer to the Subwoofer manual.
Multi-channel loudspeaker setup
Thus, a complete multi-channel setup consists of following speakers:
1. Front (stereo) speakers
2. Center speaker
3. Rear speakers (as explained above)
4. Subwoofer (possible position)
Because there are many different setup options – from 5.1 to 10.2 channel applications –
and the fact that loudspeaker positioning will also depend upon the room’s shape,
please consult your Dynaudio dealer for special applications and for placement op-
tions.
Multi-Channel Setup
13
1
1
2
3
3
3
3
4
Fig. 6 5.1 and 7.1 multi-channel speaker setup.