Owner's Manual
These
instructions
will
help
you
quickly
get
up
and
running
with
your
Dynaudio loudspeakers.
They
don't
replace
the
Operating
Guide.
Please
visit
dynaudio.com/support
for
more
information.
Positioning
Ii\
CAUTION
~
SPIKES
WITH
SHARP
TIPS
Some loudspeaker models and Dynaudio stands are equipped with spikes.
Their sharp tips could cause i
nj
uries and can damage sensitive surfaces
like hardwood or tile flooring.
►
Be
careful when handling the loudspeakers and stands.
►
Place discs (such as coins) between the spikes and the surface under
them for protection. Note: spikes genera
ll
y
won't
damage carpets.
Multi-channel
setup
In multi-channel setups, additional cha
nn
els (speakers) must be added.
See the Operating Guide for
mo
re information.
Positioning
compact
speakers
Compact speakers will perform
at
their best when used with a dedicated
stand
(s
uch as Dynaudio stands). Due
to
their compact dimensions, they
can also be placed on a shelf or a cabinet.
When placing loudspeakers in an enclosed space such as an audio/video
cabinet, a
ll
ow
clearance from the surrounding walls
to
the
top
and rear
of
the speaker.
Connecting
1.
Cable
and
speakers
► Connect a
two
-
po
l
e(+
/-) loudspeaker cable
to
the binding posts, located
on the back
of
the cabinet.
The posts can accommodate
4mm
banana
plugs,
cable
spades
or
bare
wires
.
Note: Ensure that none
of
the leads are shorting with another through loose
strands
or
otherwise.
2.
Cable
and
amplifier
►
Switch
off
the amplifier and connect the speaker cables
to
the amp
li
fier's
loudspeaker terminals.
Note: Ensure that the red marked post
of
the speaker is connected
to
the
red marked output
of
the amp, and the white
or
black marked post to the
white
or
black marked output.
3.
Multi-channel
connections
►
Proceed in the same way
to
connect a
ll
the channels
in
your
multi-channel setup.
►
Refer
to
your multi-channel power amplifier's instructions for more help.
Operation
EN
►
A new Dynaudio loudspeaker requires several weeks
of
playing
to
reach
1
Floor-standing
speakers
► Adjust each
of
the four spikes
in
the base plinth for maximum stability.
Heed the warnings above regarding the spikes.
its optimum performance capability.
►
Only use high-quality amplifiers, and run loudspeakers and amplifiers
within specified power ratings.
7