User Manual

4 5
INTRODUCTION
Congratulations on your new Dynaudio Acoustics BM5A MKll. BM5A MKll is a
proud extension of its predecessor BM5A with improved performance on virtually
every level. The improved driver technology in combination with a set of perfectly
matched amp channels will give you unprecedented monitor performance for many
years to come. It is most important, however, that you take a few minutes at this
early stage of your BM 5A’s life, to read this manual. It contains essential
information to make you get the best from your new monitors.
Break-In time
The transducers of your BM5A MKll monitor will achieve better sound quality after
breaking in. Especially after the first hours of use, you may notice a significant
advance in sound quality. Still after first few hours improvement take place, but
lesser noticeable.
The latest manual revision is always available at our website:
www.dynaudioacoustics.com
For support please also refer to: www.dynaudioacoustics.com
Please enjoy
OVERVIEW - REAR PANEL
Correct setup and connections is essential to achieve optimal performance from your
monitors. Please follow the instructions on the following pages.
1. AC power Input and fuse
2. Power On/Off switch
3. Balanced analog Input
4. High Pass filter switch
5. Level trim
6. LF - Low filter setting
7. MF - Mid filter setting
8. HF - Hi filter setting