Owner's Manual

7
dynaudio.com/focusxd Unpacking / Setting up
Spikes with sharp peaks
The oor-standing Focus XD loudspeakers allow for setup with spikes. The sharp peaks of
the spikes may cause injuries and damage sensitive surfaces like hardwood ooring or tile.
Ź
Be careful when handling the loudspeakers.
Ź
Place plates between the spikes and the surface to protect the underlying surface.
ATTENTION
Light, heat, electromagnetic radiation
Direct sunlight or excessive brightness can affect the colour of your loudspeakers’ natural
wood veneer. Built-up heat can lead to overheating. Electromagnetic radiation of different
devices can lead to mutual impairment to functions.
Ź
Avoid placing the device in very warm, cold, or humid environments.
Ź
To maintain the aesthetic quality of your loudspeakers for the long term, placement in
light-intensive, sunny environments should be avoided.
Ź
Please ensure sufcient ventilation and observe the required distances around the
loudspeakers.
Ź
Do not place the loudspeakers near devices with strong electromagnetic radiation or
devices that could be destroyed or damaged by magnetic elds.