Owner`s manual
Troubleshooting
Owner’s manual 13
Maintenance
Cleaning the subwoofer
Dynaudio loudspeakers require no special treatment apart
fromthekindofcarefulhandlingyouwouldnormallyapplyto
anyhightechproductinyourhome.
DANGER
Dangerous voltage inside!
Cleaning the BM14S II or other system components when
switched on can lead to damages or electric shock.
–Switchoffthesubwooferandallothercomponentsofyour
systemwhencleaninganyofthesecomponents.
To clean the subwoofer:
–Thecabinetandotherplainpartsshouldbecleanedwitha
softdryorslightlydampcloth.
–Dust onthe woofer diaphragms maybe removed witha
nefurniturebrush.
Note:
Avoid touching the tweeter domes as any change of their
shapemayhaveanimpactonsoundquality.
Changing the fuse
WARNING
Risk of re due to wrong fuse type!
Insertingthewrongfusetypecanleadtooverheatingandin-
ammationofthesubwoofer.
–Forcontinuedprotectionagainstriskofre,replaceonly
withsametypefuseandrating.
The fuse is placed on the rear of the subwoofer below the
mainspower input.It can bechanged withoutremoving the
ampliermodule.
8. Warranty
Dynaudio Acoustics BM14S 13
Changing the fuse
The fuse is placed on the rear of the subwoofer below the mains power input. It can
be changed without removing the amplifier module.
To change the fuse:
1. Switch off the mains power switch and unplug the power cable.
2. Pull out the fuse holder
3. Replace fuse with same type and rating
4. Push fuse holder back firmly until it is locked into position.
WARNING
Risk of fire due to wrong fuse type!
Inserting the wrong fuse type can lead to overheating and inflammation of the
subwoofer.
For continued protection against risk of fire, replace only with same type fuse
and rating.
To change the fuse:
1.Switchoffthemainspowerswitchandunplugthepower
cable.
2. Pull out the fuse holder.
3.Replacefusewithsametypeandrating.
4.Pushfuseholderbackrmlyuntilitislockedintoposition.