Owner`s manual

Maintenance
14  BM9SII
Maintenance
Changing the fuse
WARNING
RISK OF FIRE!
The fuse is placed on the rear of the subwoofer below the
mainspower input.It canbe changed withoutremoving the
ampliermodule.
Technical Information/Warranty
12 Dynaudio Acoustics BM9S
Technical Information/Warranty Changing the fuse
The fuse is placed on the rear of the subwoofer below the mains power input. It can
be changed without removing the amplifier module.
Changing the fuse
1. Switch off the mains power switch and unplug the power cable.
2. Pull out the fuse holder
3. Replace fuse with same type and rating
4. Push fuse holder back firmly until it is locked into position.
WARNING
RISK OF FIRE!
X For continued protection against risk of fire, replace only with same type fuse and
rating.
Changing the fuse
 1.Switchoffthemainspowerswitchandunplugthepower
cable.
2. Pull out the fuse holder
 3.Replacefusewithsametypeandrating
 4.Pushfuseholderbackrmlyuntilitislockedintoposition.
Forcontinuedprotectionagainstriskofre,replaceonlywith
sametypefuseandrating.