User's Manual
10
4. In Use
Your Dynaudio Music speaker can be operated and controlled from
its on-body buttons, the remote control handset or entirely via the
Dynaudio Music app.
4.1 On-body Buttons
The following paragraphs describe the on-body buttons for each
Dynaudio Music speaker model.
Music 1 and Music 3
Standby: Press and hold (1 sec) the standby button to switch your
Music 1 on or off.
Volume +/–: Press and hold the + or – buttons respectively to raise or
lower the volume. Volume level is indicated by the indicator array on
the top panel.
Playback ( ): Press the play/pause ( ) button to play or stop
playback. Press the next ( ) or previous ( ) buttons respectively to
play the next or previous track.
Note: With Wired audio sources (Aux, Opt) play/pause ( ) commands
will function as un-mute/mute operations. Wired sources are also unable
to respond to next ( ) and previous ( ) commands.
Source ( ): Press to scroll though the available sources. Only active
sources will be available for selection.
Note: Network streamed and Bluetooth audio can only be selected and
played from the Dynaudio Music app and will take priority over locally
selected sources.
Music 5 and Music 7
Volume +/–: Press and hold the + or – buttons respectively to raise or
lower the volume. Volume level is indicated by the indicator array on
the top panel.
Playback ( ): Press the play/pause ( ) button to play or stop
playback. Press the next ( ) or previous ( ) buttons respectively to
play the next or previous track.
Note: With Wired audio sources (Aux, Opt, HDMI) play/pause ( )
commands will function as un-mute/mute operations. Wired sources are
also unable to respond to next ( ) and previous ( ) commands.
Source 1 to 5: Press buttons one to ve to select favourite items
assigned in the Dynaudio Music app to each one. Alternatively, press
and hold buttons two, three, four and ve to select the HDMI,
Optical, USB and Auxiliary sources (no HDMI on Music 5) respectively.
Note: If no favourites are assigned to any buttons a single press, rather
than press and hold, will select sources.
Bluetooth (
): Press the Bluetooth button to connect and play a
Bluetooth stream from a connected and active device.