Owner’s Manual Xeo English
All Apple products are trademarks of Apple Inc. All Sony products are trademarks of Sony Electronics Inc. All Sonos products are trademarks of Sonos Inc. Logitech Squeezebox is a trademark of Logitech Inc. An update to this manual may be necessary due to product improvements and new functions. The latest version of this manual can be found on the Dynaudio website at www.dynaudio.
Important Safety Instructions 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer‘s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15.
Table of Contents Safety information Xeo loudspeakers Power supply unit for Xeo Hub, Extender, and Link 7 7 7 Scope of delivery Xeo loudspeakers (Xeo 4 or Xeo 6) Xeo Hub Xeo Extender Xeo Link 8 8 9 10 10 Unpacking Packaging material 11 11 Disposal 11 The Xeo system Components Combination examples Remote control Control elements Xeo Hub Display elements Inputs Other connections and control elements Connection 12 12 13 14 14 14 15 15 16 16 Xeo loudspeakers Connections and control elements Division i
Thank you for choosing Dynaudio Xeo. Xeo combines the latest wireless technology with impressive sound quality and makes listening to music truly comfortable and easy. The next few pages contain important information on connecting the system and its operation to ensure perfect function and the best-possible sound quality.
Safety information Xeo loudspeakers WARNING Dangerous electrical voltage If the loudspeakers are connected to the mains voltage, a dangerous electrical voltage is present inside the speakers. ►► Never open the loudspeaker housing. ►► Do not operate defective loudspeakers and disconnect defective loudspeakers from the mains voltage. Please contact your Dynaudio Xeo distributor if you have any problems. Distributor addresses can be found in the Internet at www.dynaudio.com.
Scope of delivery Xeo loudspeakers (Xeo 4 or Xeo 6) 2 Xeo loudspeakers (Xeo 4 or Xeo 6) 2 Xeo loudspeaker cloth covers 1 Xeo remote control 2 Xeo loudspeaker power cables (country-specific version) 1 Xeo first time setup manual (quick guide for installation, not shown) 8 Dynaudio
Xeo Hub 1 Xeo Hub 1 Xeo power supply unit with micro USB cable (country-specific version) 1 stereo analog cable (jack 3.5 mm – 3.
Xeo Extender 1 Xeo Extender 1 Xeo power supply unit with micro USB cable (country-specific version) 1 Xeo first time setup manual (quick guide for installation, not shown) Xeo Link 10 1 Xeo Link 1 Xeo power supply unit with micro USB cable (country-specific version) 1 stereo analog cable (RCA – RCA) 1 optical digital cable (Toslink – Toslink) 1 Xeo first time setup manual (quick guide for installation, not shown) Dynaudio
Unpacking After unpacking, make sure the system is complete and check the device and all accessories for transport damage. Transport damage may be expected if the packaging is already severely harmed. Do not attempt to commission a damaged device. If the contents are incomplete or damaged, please contact your Dynaudio Xeo distributor. Distributor addresses can be found in the Internet at www. dynaudio.com.
The Xeo system Xeo consists of several high-quality components that are optimally matched. When combined, they can fulfill the most demanding requirements for a wireless multi-room and multi-source system. NOTE: This manual describes all of the available Xeo components. It is possible that only a few of the descriptions are relevant to you, depending on your system configuration. Components 12 Xeo Hub The Xeo Hub is the control center for the Xeo system.
Combination examples Below you will find several examples of Xeo component combinations. The high level of flexibility in the Xeo system enables even more variants. Ask your Dynaudio distributor to find the perfect solution for your needs. Standard: Hub + loudspeaker Hub For a larger range: Hub + Extender + loudspeaker Hub Extender For additional active components: Hub + loudspeaker + Link This example would also be possible with only a Hub, Link, and active component.
Connection and operation This section describes the connections and control elements for the Xeo components. Please contact your Dynaudio Xeo distributor if you have any problems with connection and start-up. Distributor addresses can be found in the Internet at www.dynaudio.com. Remote control The Xeo remote control can be used to turn the loudspeakers on and off, change the volume, and select a Hub and its connected signal sources.
Display elements LED Connection status LED illuminated in blue: Connection established (to a loudspeaker, Extender, or Link). LED flashes: The Hub is searching for a connection. LED illuminated in red: The Hub could not establish a connection. Inputs 1 Aux in Input for cable with stereo jack (3.5 mm stereo) Connect devices here that have an output for the stereo jack. Line in Input for cable with RCA plug Connect devices here that have an output for the RCA plug.
Other connections and control elements Ethernet Network connection Intended for future functions. Id Transmission channel If you assign an ID, you can select the desired Hub from several Hubs using the remote control. In addition, each ID has its own transmission channel: A = 2.4 GHz, B = 5.2 GHz, C = 5.8 GHz. If the transmission quality is poor or there is a disruption caused by other radio systems, changing to a different channel may produce an improvement.
Your signal source Signal source output Xeo Hub input Cable (source – Hub) Notes Astell&Kern Headphones 1: Aux in Jack 3.5 mm – 3.5 mm – Optical 2: Optical In Toslink – Toslink PonoPlayer Jack 1: Aux in Jack 3.5 mm – 3.5 mm – Docking station, network client, Sonos, Logitech, Squeezebox, ...
Xeo loudspeakers The active Xeo 4 and Xeo 6 loudspeakers have an integrated amplifier and can be controlled with the Xeo remote control. The loudspeakers can be switched between stereo and mono mode using a switch on the rear.
Division into audio zones Speaker Id Red Green Blue Speaker Id Red Green Blue Speaker Id The Xeo loudspeakers (as well as Xeo Link) can be assigned to an audio zone using the Zone selector switch. All components assigned to a zone can be operated together via the remote control.
Cloth cover The cloth cover has been designed so it does not influence the sound dispersion of the loudspeaker. The cloth cover is attached to the housing with magnets and may be removed if needed. Setting up CAUTION Spikes with pointed ends Xeo 6 floor-standing speakers are delivered with spikes for permanent installation on the floor. The pointed ends of the spikes may result in injuries and damage delicate floors. ►► Pay attention that you do not injure yourself with the spikes.
Switching on/standby mode To switch the loudspeaker on from standby mode: ►► Point the remote control at the loudspeaker and press the ON button or press on the interface display. ▼▼ The loudspeaker will automatically search for an active Hub and an audio signal. If found, the signal will be output (autoplay function). If there is no input signal, the loudspeaker will go into standby mode after a certain period. ►► To switch it on again, press the ON button or .
Interface display The display on the housing indicates the operational state of the loudspeakers and system using LEDs with various colors and flash functions. Buttons on the display On/off switch Pressing this button for longer than 2 seconds will switch the loudspeaker on or to standby mode. Input selection A brief press of this button switches between the inputs (1 → 2 → 3 → 4 → 1...). Only the inputs in use are shown. Volume control Increases or decreases the volume.
Switch-off process The LEDs go out one by one. In the final state, only one LED is illuminated dimly in red. The loudspeaker is being switched off. Select a Hub One of the three LEDs flashes. LED 1 = Hub A LED 2 = Hub B LED 3 = Hub C Select an input One of the four LEDs flashes. LED 1 = INPUT 1 LED 2 = INPUT 2 LED 3 = INPUT 3 LED 4 = INPUT 4 Hub search The blue LED flashes; the lights in the white LEDs move back and forth.
Xeo Extender The Xeo Extender extends the reception range of the Xeo Hub. As a result, Xeo loudspeakers or other Xeo components can be operated further away from the Hub. Connections and control elements Front Left LED Right LED Both LEDs Reception status LED illuminated in blue: There is a connection to a Hub. LED flashing in red: No connection to a Hub possible. Transmission status LED illuminated in blue: There is a connection to a loudspeaker/Link.
Connecting and establishing a link Hub Extender 1. Connect the Power socket to the voltage supply via the Xeo power supply unit. Do not use a different power supply unit! 2. Select the same ID on the Hub and Extender for the Hub Id In. E.g. Hub: Id = B → Extender: Hub Id In = B. 3. Select any (other) ID on the Extender for the Extender Id Out. It may not be identical to the Hub Id In. E.g. Extender Id Out = C NOTES: Two Extenders may also be used in a sequence. Select e.g.
Xeo Link The Xeo Link receives wireless signals from a Xeo Hub or Xeo Extender and outputs analog and digital signals from its connections. As a result, you can also connect active subwoofers, active loudspeakers, or other components to the Xeo system. Xeo Link can also be connected to a 1st generation Xeo Transmitter (analog or optical-digital). This lets you operate both Xeo systems together.
Connecting and establishing a link Hub Link 1. Connect the Power socket to the voltage supply via the Xeo power supply unit. Do not use a different power supply unit! 2. Select an audio zone: Red, Green, or Blue. Use one of the outputs to connect the Xeo Link with one of the active components, e.g. the active subwoofer Dynaudio Sub 600. 3. Select the desired signal source with the remote control and control the volume.
Malfunctions Interruptions, clicking noises, or other audible interference when playing music is usually not caused by the radio transmission in the Xeo system. Often other external causes influence the transmission quality. Below are a few tips for improving transmission quality: 1. 2. 3. 4. Position all radio transmitters and receivers away from each other. WLAN devices, radio receivers, and radio systems may influence each other if they are too close together.
Technical data Loudspeakers Xeo 4 Xeo 6 Frequency range (± 3 dB) 45 Hz – 23 kHz 31 Hz – 23 kHz Power consumption during operation 5 – 38 W 7.4 – 77 W Power consumption in standby 0.34 W (with active network) 0.35 W (with active network) Amplifier performance Woofer: 50 W, tweeter: 50 W Woofer: 2 x 50 W, tweeter: 50 W Dimensions (W x H x L) 170 x 282 x 246/246 mm 170 x 854 x 246 mm Weight 6.4 kg 14.
Reminding This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Cet appareil est conforme à Ia section 15 des réglementations de Ia FCC.
IC NOTICE This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d‘Industrie Canada applicables aux appareils radio exempts de licence.
All there is. Dynaudio A/S, 8660 Skanderborg, Denmark Sales & Marketing: Dynaudio International GmbH, Ohepark 2, 21224 Rosengarten, Germany, Phone: +49 4108 - 41 80 - 0 www.dynaudio.com © Dynaudio International GmbH, Xeo Owner’s Manual 0714 Item No. 4552612. All text and image copyrights reserved. Subject to change without notice.