Owner`s manual

16 Dynaudio
Other connections and control elements
Ethernet Network connection
Intended for future functions.
Id Transmission channel
If you assign an ID, you can select the desired Hub from several Hubs using the
remote control.
In addition, each ID has its own transmission channel: A = 2.4 GHz, B = 5.2 GHz,
C = 5.8 GHz. If the transmission quality is poor or there is a disruption caused by
other radio systems, changing to a different channel may produce an improvement.
Power Connection for power supply unit
Connect the delivered Xeo power supply unit here.
Do not use a different power supply unit!
Connection
► Connect the Hub to the mains voltage using the POWER connection and the Xeo power supply
unit. Do not use a different power supply unit!
Note: If you connect the Xeo Hub via a USB cable to a computer (that is switched on), you do not
need an additional mains connection.
► Connect your signal source to the appropriate input on the Hub.
Below you will nd a selection of signal sources and options for connecting to the Xeo Hub.
Your signal source Signal source
output
Xeo Hub
input
Cable
(source – Hub)
Notes
Notebook, MAC™, PC USB* 4: USB in USB – mini USB * The Hub works as a
sound card.
Optical 2: Optical In Toslink – Toslink
Line out 1: Line in RCA – RCA
Headphones 1: Aux in Jack 3.5 mm – 3.5 mm
Smartphone, other portable devices Headphones 1: Aux in Jack 3.5 mm – 3.5 mm –