User Manual

ManualsBrandsDynavector ManualsPhoto AccessoriesSuperStereo Adapter Adp2

Dynavector SuperStereo Processor DV-SS-Adp-2

User Instructions and Installation Manual

Introduction

Dynavector SuperStereo has been highly acclaimed as the only system able to recreate

real music from the playback of recorded sound.

Because of the limitations inherent in conventional stereo systems, the music which

they reproduce, regardless of its scale or quality, lacks the sound of the original

performance. There is a missing link which has been the greatest problem affecting sound

reproduction. SuperStereo is the first system in the long history of recorded sound to

succeed in breaking through this difficult barrier.

The DV-SS Adp-2 is designed to be straightforward to install and use so that music

lovers who may not be especially familiar with audio equipment can enjoy in their homes

life-like reproduction from their CD's, records and tapes without difficulty.

Summary of content (8 pages)

PAGE 1
Dynavector SuperStereo Processor DV-SS-Adp-2 User Instructions and Installation Manual Introduction Dynavector SuperStereo has been highly acclaimed as the only system able to recreate real music from the playback of recorded sound. Because of the limitations inherent in conventional stereo systems, the music which they reproduce, regardless of its scale or quality, lacks the sound of the original performance. There is a missing link which has been the greatest problem affecting sound reproduction.
PAGE 2
PAGE 3
Installation Methods METHOD 1: CONNECTION OF THE ADP-2 TO A NORMAL STEREO SYSTEM CONSISTING OF A PAIR OF LOUDSPEAKERS IN FRONT AND AN INTEGRATED PRE-MAIN AMPLIFIER A small pair of extra speakers of good sensitivity and some speaker wire will be required. Ensure that your amplifier is switched off and unplugged from the wall socket. Then: 1) Disconnect the speaker wires from the speaker output terminals of your existing amplifier.
PAGE 4
When the above steps have been carried out, the installation procedures are complete. It now only remains to adjust the controls of the Adp-2 and amplifier. To do this: a) Put the SP/ LINE switch on the rear panel of the Adp-2 ((5) in the accompanying illustrations) to the SP position. b) Select either the Popular/Rock or Classic position using switch shown as (10). c) Adjust the position of the sub speakers.
PAGE 5
After listening for a little while, set the "SUB SPEAKER POLARITY" switch on the Adp-2 to either + or -, selecting the position which gives the most natural and deep bass. The volume control of the Adp-2 and the Popular/Rock/Classic switches can be adjusted to suit the nature of each recording. METHOD 2: USING A SEPARATE PRE-AMPLIFIER AND MAIN AMPLIFIER 1) Using the usual audio connection cables with phono plugs, connect the pre-amplifier output to the left hand LINE IN sockets of the Adp-2.
PAGE 6
METHOD 3: WHERE A BIGGER SYSTEM NEEDS MORE POWER FOR SUB SPEAKERS Where a more powerful amplifier is needed to drive the sub speakers; 1) Follow steps 1) and 2) in Method 2. 2) Connect the “PROCESSOR OUT” terminals of the Adp-2 to the input terminals of the second power amplifier, as shown in the illustration. 3) Connect the sub speakers to the speaker output terminals of the second amplifier. The volume control of the Adp-2 will control the volume of the second amplifier.
PAGE 7
Specifications Model Adp2 Analogue/digital SuperStereo processor with power amplifier 300 ohms (integrated amplifier) 50 Kohms (pre-amplifier) overload warning indicator level LINE IN 1.0 volts SPEAKER 10.0 volts (= 4 ohms 25 watts) PROCESSOR OUT 4 .
PAGE 8
DYNAVECTOR SUPERSTEREO PROCESSOR ADP-2 TERMS OF GUARANTEE This processor has been carefully tested during production and before final dispatch. In the unlikely event of a fault occurring, the supplier undertakes for the original purchaser to repair it without charge for parts or labour or, at his discretion, replace the processor during the period 12 months from the date of purchase, subject to the conditions and exclusions given below.