Instructions

blue LED starts flashing and signals the connection

availability. (If you have inserted memory storages

at inputs 10 and 11, you may have to switch to the

BT channel by pressing the "MODE" button [7]

first).Now locate the amplifier in the list for availa-

ble devices with your BT-compatible source device.

You can find more information in the operating

instruction of your source device. The VT-80 will

appear in the list under the name "DYNAVOX". After

you have selected it, the connection will get confir-

med acoustically. From now on, all audio signals are

transmitted to the Dynavox VT-80.

Connecting an additional power amplifier or

active subwoofer

The RCA jacks "PRE-OUT" (18), on the back of the

unit, can be used to add another output stage (eg

for sounding a further room) or an active subwoofer

to the volume controled Stereo output (line level),

of the currently selected source. The output level of

the pre-amplified output "PRE-OUT" (18) depends

on the volume setting, the sound control (BASS,

TREBLE) and the insertion of a headphone. Connect

this signal output to the signal input ("LINE IN" /

"INPUT" etc.) of the power amplifier / active sub-

woofer using commercially available RCA cables.