Manual

39
Mix in a
microphone signal
Add echo to the
microphone signal
Autostandby
ON/OFF
MIC VOL
(3)
DIGITAL ECHO
(4)
A-S
ON/OFF
(17)
With this dial you change the volume of the microphone signal
and thereby determine how loud the microphone signal is in the
final mix with the sources (karaoke function).
If no microphone is used, it is recommended that the dial be set to
its minimum.
If this dial is turned in a clockwise direction, echo will be added to
the microphone signal with increasing intensity. If no echo is desi-
red, then this dial must be turned in anticlockwise direction right to
its end position. If no microphone is connected, then this setting
has no effect.
Automatic shutdown in terms of eco design regulation
If there is no input signal for about 15 minutesthis device switches
off automatically. It will then have a power consumption of less than
0.4 W. In order to switch on the device again, press the power but-
tontwo times. This device has got no standby or armed state. If
you intend not to use the device for a longer period of time it is
recommended to plug it off from the mains. The automatic standby
can be set to OFF with the switch on the backside of the device (A-
S ON/OFF).
Operation Button(s) Description
OPERATING THE APPLIANCE
E-SA18 MKBT_A6_quer_RZ_Okt.qxp_Layout 1 30.09.21 09:47 Seite 39