Submittal Sheet

ManualsBrandsDynesic ManualsChemicals & CleanersPANSEAL Drain Pan Coating Burst-Seal Bag (250 Grams/6 Sq Ft)

SELECTION & SPECIFIC DATA

Generic Type

Polyamide Epoxy

Description

PANSEAL is s a unique, multi-component, epoxy system formulated

for corrosion control and restoration of petroleum storage tanks.

PANSEAL Cartridges & Burst Packs are packaged for smaller (6

square feet coverage at 15 mils thickness) applications such as

sealing leaks in drain pans and other HVAC applications. PANSEAL is

flexibilized to reduce coating stress resulting from mechanical and

physical forces exerted on the tank bottom. PANSEAL may also be

used for chemical storage tanks providing good chemical resistance

to organic acids, alkali and salts. PANSEAL is known for its forgiving

application characteristics in adverse and varied conditions.

PANSEAL quickly seals and repairs leaking and corroded surfaces,

forming a new, non-corroding and permanently restored surface.

PANSEAL has excellent adhesion properties which allows it to bond

to steel, concrete and iron even when coating conditions are less

than ideal. PANSEAL can be used on a variety of substrates and

applications such as wastewater (tanks, lift stations, wet wells, and

manholes), storage tanks and cooling tower repair. PANSEAL is also

ideal for interior or exterior pipe lining or coating and will protect

the substrate with excellent chemical resistance properties.

Product Features & Benefits

• Seals leaks immediately

• Minimal system down time

• Easy brush/roller/spray application - Sets up underwater

• 100% solids and entirely free of solvents and VOCs.

• Works on metal, fiberglass, stainless steel, concrete and wood surfaces

• Bonds chemically and mechanically to the substrate

• Excellent adhesion strength – 2,750 psi (pull-off adhesion test ASTM D 4541)

Recommended Uses

• Cooling Tower Repair

• Condenser Pans

• Tank Linings

• Secondary Containment Lining

Leak Repair, Flooring, Pipeline Coating, Clarifiers, Collection Systems, Digesters, Lift

Stations, Manholes, General Corrosion Protection, Acid Resistant Linings, Abrasion

Resistant Linings and Exterior Finishes

Color/Part # Light Gray, Dark Gray, Black Red, White

Finish Gloss

Primer Self-priming

Solids Content By Volume 100%

Theoretical Coverage 6 ft2 at 15 mils thickness

Dry Temp. Resistance Continuous: 220°F (104°C) Non-Continuous: 250°F (121°C)

Discoloration and loss of gloss occurs above 200°F (93°C) but does

not affect performance.

Under Insulation Resistance

Continuous: 175°F (79°C)

Product Data

PANSEAL Cartridges, Burst Packs

2000PC, 2000PB

Summary of content (3 pages)

PAGE 1
Product Data PANSEAL Cartridges, Burst Packs 2000PC, 2000PB SELECTION & SPECIFIC DATA Generic Type Polyamide Epoxy Description PANSEAL is s a unique, multi-component, epoxy system formulated for corrosion control and restoration of petroleum storage tanks. PANSEAL Cartridges & Burst Packs are packaged for smaller (6 square feet coverage at 15 mils thickness) applications such as sealing leaks in drain pans and other HVAC applications.
PAGE 2
Product Data PANSEAL Cartridges, Burst Packs 2000PC, 2000PB 2. Elasticity Specific Gravity 8% resin: 1.45 hardener .
PAGE 3
Product Data PANSEAL Cartridges, Burst Packs 2000PC, 2000PB 3. Shipping Weight (Approximate) Storage Temperature & Humidity Storage PERFORMANCE DATA TEST METHOD ASTM D-4541 Dry ASTM D-4541 Dry ASTM D-4541 Wet 5 days 70 °C water ASTM D 4060 Abrasion 1000 cycles, CS17 wheel 1000 gm. load ASTM C-109 Compressive Strength ASTM D-2240 Hardness 1 cartridge: 1 lb. 12 cartridge (case): 12 lbs. 1 Burst Pack: 1 lb. 12 Burst Pack (case): 12 lbs. 40° – 110°F (4° – 43°C) 0 – 100% Relative Humidity Store Indoors.