Submittal Sheet

ManualsBrandsDynesic ManualsChemicals & CleanersPANSEAL All Purpose Sealant, Coating & Long-Term Protection (1 Gallon Kit)

SELECTION & SPECIFIC DATA

Generic Type

Polyamide Epoxy

Description

PANSEAL is s a unique, multi-component, epoxy system

formulated for corrosion control and restoration of

petroleum storage tanks. PANSEAL is flexibilized to reduce

coating stress resulting from mechanical and physical

forces exerted on the tank bottom. PANSEAL may also be

used for chemical storage tanks providing good chemical

resistance to organic acids, alkali and salts. PANSEAL is

known for its forgiving application characteristics in adverse

and varied conditions. PANSEAL quickly seals and repairs

leaking and corroded surfaces, forming a new, non-

corroding and permanently restored surface. PANSEAL has

excellent adhesion properties which allows it to bond to

steel, concrete and iron even when coating conditions are

less than ideal. PANSEAL can be used on a variety of

substrates and applications such as wastewater (tanks, lift

stations, wet wells, and manholes), storage tanks and

cooling tower repair. PANSEAL is also ideal for interior or

exterior pipe lining or coating and will protect the substrate

with excellent chemical resistance properties. PANSEAL is

used for commercial and industrial applications worldwide.

Product Features & Benefits

• Seals leaks immediately

• Minimal system down time

• Easy brush/roller/spray application

• 100% solids and entirely free of solvents and VOCs

• Works on metal, fiberglass, stainless steel, concrete and wood surfaces

• Bonds chemically and mechanically to the substrate

• Excellent adhesion strength – 2,750 psi (pull-off adhesion test ASTM D 4541)

Recommended Uses

• Cooling Tower Repair

• Condenser Pans

• Tank Linings

• Secondary Containment Lining

Leak Repair, Flooring, Pipeline Coating, Clarifiers, Collection Systems, Digesters, Lift

Stations, Manholes, General Corrosion Protection, Acid Resistant Linings, Abrasion

Resistant Linings and Exterior Finishes

Color/Part # Light Gray - Dark Gray, Blue, Black Red, White for special orders.

Finish Gloss

Primer Self-priming

Dry Film Thickness 8 – 12 mils per coat

Solids Content By Volume 100% +/- 1%

Theoretical Coverage 1604 ft2 at 1 mil, 106 ft2 at 15 mils, 64 ft2 at 25 mils

Dry Temp. Resistance Continuous: 220°F (104°C), Non-Continuous: 250°F (121°C).

Discoloration and loss of gloss occurs above 200°F (93°C) but does

not affect performance.

Under Insulation Resistance

Continuous: 175°F (79°C)

Product Data

PANSEAL Gallons

2000PG

Summary of content (4 pages)

PAGE 1
Product Data PANSEAL Gallons 2000PG SELECTION & SPECIFIC DATA Generic Type Polyamide Epoxy Description PANSEAL is s a unique, multi-component, epoxy system formulated for corrosion control and restoration of petroleum storage tanks. PANSEAL is flexibilized to reduce coating stress resulting from mechanical and physical forces exerted on the tank bottom. PANSEAL may also be used for chemical storage tanks providing good chemical resistance to organic acids, alkali and salts.
PAGE 2
Product Data PANSEAL Gallons 2000PG Elasticity Specific Gravity 2. 8% resin: 1.45 hardener .97 SUBSTRATES & SURFACE PREPARATION General Surfaces must be clean and dry. Remove all dirt, dust, oil and all other contaminants. Steel Immersion: SSPC-SP10 Near White with jagged profile of 2.5 – 3.5 mils. Non-immersion SSPC-SP6 1.5 – 3.0 mils SSPC-SP2 or SP3 are suitable cleaning methods for mild environments. Concrete/CMU Concrete must be cured 28 days at 75°F (24°C) and 50% relative humidity or equivalent.
PAGE 3
Product Data PANSEAL Gallons 2000PG 3. Airless Spray Plural Component Tip Size: .025 – .
PAGE 4
Product Data PANSEAL Gallons 2000PG 4. more than 14 days. Always inspect the product prior to use to make sure it is smooth and homogeneous when properly mixed. PERFORMANCE DATA TEST METHOD ASTM D-4541 Dry ASTM D-4541 Dry ASTM D-4541 Wet 5 days 70 °C water ASTM D 4060 Abrasion 1000 cycles, CS17 wheel 1000 gm. load ASTM C-109 Compressive Strength ASTM D-2240 Hardness SYSTEM Blasted Steel 1 ct. Scuffed FBE 1 ct. Blasted Steel 1 ct. RESULTS >2,500 psi >2,000 psi >2,500 psi Blasted Steel 1 ct. 80 mg.