Products PCMCIA 56K Data/Fax Modem Installation Guide

2
PCMCIA Fax Modem Card
RJ-11 Phone Line Cable and Adapter
Floppy Disk Driver
CD-ROM of Communication Software
Installation Guide
Package Information
1
3 4
Notebook PC with Pentium CPU or above
PC with PCMCIA Rev. 2.1 or later Type II socket
At least 16MB RAM
Operating System: DOS, Windows 95/98/ME/ NT/2000/XP
System Requirements
Part 1. Hardware Installation
Installing the PCMCIA modem card:
You will be installing the modem in the Type II or III PCMCIA
slot in your computer. If you are having trouble locating this
slot, refer to your computer's user manual or consult the
manufacturer of your computer.
Gently slide the PC Card into the PCMCIA slot. Make sure
the card is firmly in the socket. When this is done you will be
ready to setup and install your communication software.
Part 2. Driver Installation
1. Setup for DOS/Windows 3.x
Check your system manual or consult the manufacturer of
your computer to make sure your computer has the Card
and Socket Services drivers pre-installed. The driver
software allows your computer to access the PCMCIA
sockets.
The most popular and common Card and Socket Services
are AMI Card Manager Pro 3.0, Phoenix's PCM and
TM
Systemsoft Cardwizard .
If Card and Socket Services drivers are already installed in
your computer, you should be able to simply plug in your
fax modem care and begin installing and using the
software.
Please be sure the COM port for modem cards, which is
assigned by the Card and Socket Services, is the same as
the setting of your communication software in your
computer.
Click on the “Have Disk” button from “Install New
Modem” window and press the “Next” button.
Windows then asks you to specify where the driver for
the modem is located. Insert the fax modem drivers
diskette into your floppy drive, select drive “A:\” and click
“OK”.
Select the product name of fax modem from Models” list
box and press the “Next” button.
Select the available COM port from the list box and
press the “Next” button.
You will see the “Your modem has been set up
successfully” window appear. That means the modem is
now ready for use.
4. Setup for Windows 2000/XP
This device can be installed in Windows 2000/XP with the
default driver for V.90. Please update the driver in the
diskette then the PCMCIA modem card can support V.92
function. Just follow these steps to get up and running:
Insert the fax modem card into a PC Card slot in your
computer.
Start the computer.
The operating system will auto detect this device and install
it with the default driver.
3. Setup for Windows NT4.0
Windows NT comes with most of the drivers necessary
to access your fax modem. Just follow these steps to get
up and running:
Insert the fax modem card into a PC Card slot in your
computer.
Start the computer.
Double click on “Control Panel/Modems”, select the
“don't detect my modem; I will select it from a list” option
and press the “Next” button.
2. Setup for Windows 95/98
Windows 98 comes with most of the drivers necessary to
access your fax modem. Just follow these steps to get up
and running:
Start the computer.
Insert the fax modem card into a PC Card slot in your
computer, making sure the card is securely inserted into
the socket.
Windows will display the “New Hardware Found” dialog box.
Select the “Driver from disk provided by hardware
manufacturer” and click “OK”. If you do not see the above
selection, simply click “Next” to continue.
Make sure the directory is A:\in the drive window. Click
“OK” to continue. The modem is now ready for use.