Quick Setup Guide

DX-SF128

4-Outlet 2-USB Power Hub

QUICK SETUP GUIDE

Congratulations on your purchase of this Dynex Power Hub.

Features

• Two USB charging or power ports, 2.1A total charge

current—Fast charging for two smartphones or one tablet.

Using your power hub

1 Plug the Power Hub into the upper outlet of a standard

120V AC outlet, with the plastic plug in the ground jack of the

lower outlet.

2 Plug the power cords from up to four devices into the AC outlets

on the power hub.

3 The USB ports can be used to charge or power certain USB

devices.

Speciﬁcations

• Dimensions (L×W×D): 4.8" × 3.1" × 1.4" (not including plug)

(123 × 79 × 35 mm)

Electrical specications:

• Load rating: 15 amps

• Line voltage: 125V AC @ 60 Hz

Plastic plug

Before using your new product, please read these instructions to prevent any damage.

USB ports

AC outlets

PAGE 1
Congratulations on your purchase of this Dynex Power Hub. Features • Two USB charging or power ports, 2.1A total charge current—Fast charging for two smartphones or one tablet. Using your power hub DX-SF128 4-Outlet 2-USB Power Hub 1 Plug the Power Hub into the upper outlet of a standard 120V AC outlet, with the plastic plug in the ground jack of the lower outlet. Plastic plug USB ports 2 Plug the power cords from up to four devices into the AC outlets on the power hub.
PAGE 2
Safety precautions • RISK OF ELECTRIC SHOCK - Use only in dry locations and only indoors. • DO NOT plug into another relocatable power tap. • DO NOT use with any aquarium equipment. • DO NOT use if correctly grounded outlets are not available. • DO NOT install this device if there is not at least 30 feet (10 meters) or more of wire between the electrical outlet and electrical service panel. FCC Statement This device complies with Part 15 of the FCC Rules.